Search results

I have these hooks, don't see why you could not use them on an aluminum fence. https://www.amazon.com/gp/product/B078RNLYYV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Not that this helps much but I agree with you @hepmama. I think Polaris builds these things to last 1 year and that's it. I have the Quattro Sport, provided to me as part of my build last year. It's been in for warranty repair twice in the past 4 months and now needs to go in again. My...

I was able to solve this issue with mine, the high back chairs. Pick up the back of the chair (the high back) and lean it forwards towards the "hump" where you knees go which moves the water fill forward and stabilizes the rocking. Worked for me.

There are several on ebay for $20-$25 that claim compatibility for the 7790. I discovered them while looking for the 7786 (water/air/solar temp sensor). Maybe worth a shot? Also, reading more, it appears all these sensors are the same, but depending on the Jandy part number you order you get...

Here is a pic of where the multiplex board is in my box for reference

Check out jandyrepair.com. You may need to call/email as they don't keep the online store up-to-date. I have no direct affiliation with them, however, I have purchased several items (including an RS 50 pin CPU) and they deliver exactly as described each time. Keep in mind you likely will have...

If it's under warranty and you have a Leslies nearby they are an approved service center. If not under warranty, agree with the above, eBay for the best price but beware no warranty, pool dealers are getting around $1000 for the PDA, but you would get a warranty if they're an authorized dealer...

Adults in my family like 78+ but the kids will swim anything above 70! :LOL:

GFCI/bonding/and possibly a pool/spa safety transformer which takes 120VAC and converts it down to 12-13 VAC for your underwater lights. The safety transformer works by disconnecting the load should the transformer malfunction thereby effectively stopping voltage from coming down the line to the...

@PoolGate Do you really your pump 23 hours and 55 minutes per day? Agree with the above re: pump/heater. I run my pump 10 hours per day on the iAqualink schedule, if my heater is ON when the scheduled pump turn off time is reached it will continue running until the temp set point is reached...

Thank you for confirming, match requested and on it's way to you.

Old thread, new post. I too am considering going with a Robot (Dolphin 200 variety) but my Quattro Sport has been working fantastic until just recently. I leave mine in the pool 24/7/365 and it runs for 90 minutes each day via my automation. The Quattro Sport was included in my build along...

Same. I moved mine to get it out of the direct sun, what I did not realize is the air temp probe needs to be vertical or it will wildly fluctuate, at least mine did. When I moved it I mounted it horizontal and the air temp would bounce around 5-10 degrees every 30 seconds. Once I changed it...

The J-Box for the PDA system is likely the grey/black box (pictured below). The RS/Web J-Box is Blue/White. @RonLeah what revision PDA/RS do you have?

The only fill water is coming from rain right now. The only items I add to my pool are as follows: Muriatic Acid 31.45% (when the PH is above 8) Diamond Crystal Splash Ready Salt (when it tests below 3000) Puri Tech Cyanuric Acid (when CYA tests below 55-60) Robelle Calcium Plus (when CH tests...

Will check my source water, however, I don't add much water to my pool, in fact, my autofill has been turned off for the past 6 full months (its connected to a hose bib which is off). We've had enough rain to keep it "too full" and the leveler is usually draining.

Any recommendations would be much appreciated regarding PH/TA levels. Some quick background, the pool was completed and filled in July 2021, it's a gunite/plaster/SWG setup. I've had to add MA just about every 2-4 weeks as my PH likes to creep up to 8.0-8.2 since the pool was opened. I've...

Thanks for thinking about this!! My company matches as well. Just looked up TFP on my donation center and it's already setup too. :) @Leebo Just to confirm, the match profile we show is an address based in North Carolina. Is this correct? Can share the rest of the details in a PM if you...

If you have the JXi 400K BTU heater you need at least 40 gpm to active the flow switch for ignition to take place. If this happens again you should see a message on the JXi heater display "No Flow"

Glad you got it working, seems it was a flow issue possibly. I have all Jandy equipment and my JXi heater is connected to the panel via firemans switch, not RS485 which is why you don't see "Remote TSAT" so apologies for any confusion above.

Does the display on the JXi heater say "Remote TSTAT enabled"?

When you select heater are you prompted to enter your desired temperature? The sound you hear is the bypass opening, provided there is enough flow the heater will begin it's cycle/ignition phase. If there is not enough flow it will never begin the ignition sequence. What is your program set...

Very interesting, looks like Page 7 and Page 9 confirms the Smart JVA indeed has a relay since you need to supply power to the Smart JVA from the power center 24 volt wiring, just like the Aux Relay board and it has the same connection back to an open AUX port for control/assignment from what I...

I was/am looking at the Smart JVA but don't know if I need this since my 2 JVAs will be cammed for my use/purposes. I like you can control them in 5% increments with the Smart JVA but don't know if I would use that feature enough to make it worth it UNLESS the Smart JVA also has a relay similar...

Will do, its on my list of "Spring things to do". :) Maybe worth adding the JVA Aux Relay Board information to the further reading topic?

Thanks. Looks like Jandy makes such a device for this situation, 5254 Aux Relay board (Installation guide). Seems if you have a single body of water CPU you can assign the Intake and Return to an AUX button as well, so highly dependent on each users particular setup if you need relay boards...

All the thanks to you and ajw22 for the help with the upgrade. Assume you mean the Intake and Return ports are hard coded? I.e. why they show used.

My cleaner booster pump is on Aux 1 and I have the dip switch set as such. Any other options? I can’t be the only person with Jandy equipment that wants multiple JVAs — at least I don’t think I am. 😂