Search results

Hello, current readings for gunnite pool… FC 5 Ph 7.8 Cya 60 Salt 3300 CH 250 Temp 76 Water sparkling and clear Pool math says to add 17 lbs of calcium chloride to raise CH to 350. What is the best process to add and will I raise the salt too high? Will I effect the other levels that I...

The ribbon was secure. But the reboot corrected the issue. Shows correctly now. Thanks for the help!

This is what the app shows...

Hi All, Have you ever seen this? I cannot find this in any documents or in the forum. Just replaced the salt cell and when I look on the app all is good. Just have this on the outside unit. Do I need to reset or something I missed?

Did I miss anything? And the pool itself does not smell like chlorine, only smelled it on clothes and skin after swimming and this is not the norm. FC 7.5 CC 0 CYA 40 PH 7.2 TA 50 CH 350 Salt 3200 pool temp 91 SWCG at now 50% (was 100% as prior recommendation was to increase chlorine) VS...

These are results from my TFP pool kit. I did the ppm and FC is 7.5 and CC is 0. Doesn't that mean Total Chlorine is 7.5?

I watched TFPs YouTube video on the relationship between FC and CYA and I think I may be looking at this wrong. Before recent chemical additions I did not have significant chlorine loss per day. Usually run SWCG at 50/60 % and run pump 8 hours a day and still keep chlorine at 2 or 3 and I have...

Ok, so I am safe to continue to add stabilizer to increase CYA to 70?

This morning: TC = 5+ PH = 7.2 CH = 325 TA = did not retest yet Salt = 3200 (did not add the salt and still got this level. CYA = have not retested, but stopped adding after 4lbs dry stabilizer as it seems to be raising my salt level The water still clear, Yay! Still see the black spots, but...

I am glad I waited on the salt. Is it the calcium that is causing the increase in ppm?

Thanks! Water not cloudy, but I do have a few black spots I had to rub the chlorine puck on to "erase".

Good morning pool people! I have read many threads on the order of adding chemicals but I am still not sure. Below are my test results from this morning and then the list of the chemicals and amounts to add as recommended by my pool math app. So any advice on order of adding and wait time...

I was told by the technician that installed the iAqualink that there is a min rpm for the SWG to work. I believe he said 2500. Could that be the issue? Or was I fed some bologna? I will note that it did work after I changed the min speed.

Hello Looking to extend swim season here in Northeast Georgia. Average ambient temp in Dec and March about 55 degrees (including overnight temps), which would be about the most I would hope to extend. Through my research here on the site and other sources, I have decided that an electric heat...

Wet Edge Signature Matrix Coastal Blue. Depth is 4' to 7.5' and tanning ledge is 6".

I was thinking the same thing but didn't want to say it. We spend more time on drainage design than the pool for this very reason. I managed a property with a pool "in a hole" so to speak and it was a nightmare until we found the right solution. Divert runoff, french drains, retaining walls...

Hello TFP folks - Help please Still trying to get some issues addressed. Read lots of threads on how to deal with a PB that does not finish the job. Great info! We are currently withholding final payment because we cannot get the PB to address a couple major concerns. We had to resort to...

Wow! Turned out fantastic! Beautiful!! I noticed you have plenty of saw cut joints. How did the deck turn out? Do you see any hairline cracks? Did they use rebar or wire? What PSI did you use? Sorry for all the questions. :)

85 today :)

Don't mean to scare you, but we are 6+months into a 12 week job. We were told 10 to 12 weeks. This company has over a dozen other jobs going on. Weather was a big part of our delays, but there were plenty of missed opportunities. Poor job management once the weather improved. Very frustrating...

Hello TFP It is not going well with pool build. We are possible looking at sending a demand letter to our build due to lack of performance. Let me get up to speed. Project started 10/19/18, was told it was a 10 to 12 week job. We have been patient due to weather delays throughout the process...

Hello TFP folks! Hoping you can chime in again for me. It turns out the PB did not originally have a vs pump so we just amended. We confirmed we are getting the Jandy 1.65 hp flo pro. I looked over the specs and it seems like the right choice. Is this a good pump for my pool?

Thanks so much for the NPC document. Our pool build has been less than ideal so we will follow along closely. Here are my results on the tap water for your review... FC 1.5 Ta 33 Ch 25 Ph 7.2