Search results

Hello All: I am in need of a new pool liner. After 14 years mine has faded and several patches. I got a quote for 27mil and 20mil, both Merlin. The 27mil was a little over $1,000 more. My question is does it it worth the extra $$? Also, they mentioned GLI vinyl pool as an option. Any thoughts...

Anyone have any thoughts? maybe JB plastic weld? construction adhesive?

Basically it’s leaking on the one side where this is a little dent. I assume from someone removing it with a screw driver.

Pressure side.

Hello! I have a jandy 3 way valve that is leaking-I've replaced all seals and lid and its still leaks. It appears it is leaking from a "dent" in the housing (looks like it was from a screwdriver). Anyway the bottom half of the housing it buried in concrete and I don't want to rip up the concrete...

Hello All: Can anyone tell me if they are experiencing very high pool liner costs? I know prices are up on everything. I just got a quote for a new liner (approx 38x15 25,000 gallons) and it was $8500 not including water. Im in northern NJ. Seems very high and im wondering if I should wait...

Hello all! I recently replaced two pool jandy leds lights with sunseekers led lights. Install was easy and they look great. I primarily use the Iaqualink app from my phone. Any suggestions how to operate these lights using the iaqualink app? I understand the colors dont match up with any of the...

I have considered that but I need 1-2 more years out of it. Im getting natural gas in my house next spring and want this to last (if possible) until then.

Hello-I found a puddle of water under my pool heater. I took the top off and found that the header gaskets are leaking. Looks like this is a cheap repair and parts are available (part R0050800 but before I take the rest apart do I need/should replace anything else when I take the heat exchange...

Thanks guys. Without taking the light out is there away to check to model I have?

I dont know if they can be repaired. The one light is stuck on red and wont change colors. They are pretty old so I figured I would change them both.

ok thank you. What about a good long lasting non led? something with some good color changing abilities and will work with my iaqualink setup. Do they need to be Jandy brand or will Pentair or other brands be ok?

Hi All: One of my Jandy lights burned out last fall so im going to replace both pool lights. They are the larger sized color changing and were installed in 2006. (I dont have the exact model in front of me). I want to replace with a good quality LED. I use Jandys iAqualink app and want...

Hi everybody: I just did a complete rebuild on my Polaris. Gears, bearings, belts, seals, wheels, etc and a new backup valve. Now, the cleaner gets stuck behind the ladder (10 years before rebuild and it never got stuck) and it seems to be focusing in the deep end of the pool. Ive messed with...

anybody have any thoughts?

This doesn't answer your question but I have basically the exact issue and just posted a similar bulletin. Hopefully someone knows what is going on.

Hi TFP- Late last fall I added the iAqualink system to my pool. After the installation, my pool lights are not synchronized. One light may be red while the other is green or blue. Also, on the app, the light options do not match either of the pool lights or single spa light. If I choose...

Ok so I recently learned the the Iaqualink has a help feature which can show if anything is not working properly and it says my solar sensor is "shorted". I dont think it is but I will check it out later.

Hi Guys: I attempted to hook up the 4 wire plug to the Jandy I-Aqualink panel to see if the Iaqualink will recognize it but I dont believe it does. Any advise on this? Can the two communicate so I can control the Salt output with the Iaqualink? Thank you! Bob

Hi Guys: I just switched over to the Iaqualink from my older PDA setup. I switch the board out and replaced all the wires in the same places. However, my solar sensor does not appear to be working. The Solar turns on when I activate it but stays on in the colder weather when it should be...

ok thank you. Do I just need to 1q20-RS kit to convert? Will I need anything else? I have a wifi coverage in my equiptment room. Thank you

Hi All: My 9 year old PDA stopped working after I accidently left my it outside for a few weeks in the rain and sun. I put new batteries in and it wont turn on. It blinked a few times and went dead. Im thinking of replacing with the iaqualink and using my cell/ipad rather than a new pda. Looks...

There is a target temp (pool temp) but the jandy does not show the solar temp (unless I dont have it set up correctly). Is there away to test the temperature sensor that is on the roof? Thanks

There is a sensor but my PDA dooesnt show the temp. My pda onlu shows air temp (which is located inside my pool shed) and water temp.

I did flip the switch and the actuator moves easily. My system shows the outside air temp and water temp and the both look accurate. Thanks

Hi All: A few days ago I noticed my 3 way valve was not open to allow for flow to my solar panels. It was plenty hot out and they should have been on. A few questions. What is the best way to test the solar temp sensor? Also is there anything else that could be preventing it from opening? I...