Search results

Have to agree with you about spending extra money for Cynric Acid to lower the potential of the chlorine you paid to make. I have an endless supply of Chlorine. Why would I lower it's potential when I can set my controller at 50% and every other day I have a reading of 3-6PPM of chlorine. KIS...

Love my DolphinM400 started with Polaris 360 had aquabots nothing as easy as the dolphin scrubs and easy to clean.

Put the pipe for the slide in now, using a hose will just get in the way later. did you get a light in the pool?

I bought the Dolphin 400 by Maytronics a little pricey but well worth it. My pool has never been so clean. I've had aquabot and polaris hands down the Dolphin wins.

Could you take a picture and a link of the new thermistors for future use by me. Thanks

I just shelled out $1000+ for my SWG system so $500 is cheap. You already have the salt and controller. No brainer here spend the $500.

if you don't mine paying the money for electric by all means keep doing what you're doing. It works don't fix it. CYA kind of puts the chlorine to sleep so its not as active. it protects the chlorine from the sun so its not as potent either. This is why commercial pools shy away from CYA(bather...

You should keep your Calcium levels higher also, the water will pull it out of the concrete 300-400ppm should be good.

Are you sure that your inlets haven't changed like those ball directional covers. They restrict flow and it sounds like you have less restriction somewhere. Is there sand in the pool?

I know this could very trying but it will be worth it in the end. There are skimmer nets that are made just for large amounts of leaves. good luck

I tend to disagree with comments about Hardness in vinyl pools. I think its wise to use the langelier index of balanced water. I worked in a water park on the east coast and if I added Calcium on my partners weekend he knew just by looking at the wateron Monday that it was clearer. You don't...

Okay update on my situation added stabilizer to 20ppm (need to get more I know). TuesdayI added 5 Gallons of sodium hypo brought level to 13 ppm and the chart I believe said to get it to 16 ppm so I added Calcium Chloride miss read the amount and ended with 36 PPM chlorine. ran the filter and...

I though my chlorinator wasn't working so I added Liquid Chlorine and found the water wasn't holding Chlorine. I added two Gallons in the 25,000 gal pool and had a a good 5+ on my comparator test the next day I had zero. I then broke out the Titration kit (Taylor) and now read. Free CL .2 Total...

I was looking at the water coming out of the hose on the inlet and just the hole in the pipe on the outet. I just put a hose on the outlet and the pressure looks the same my chlorine just doesn't get any higher I add Liquid to keep it at 2PPM. I want to go on Vacation and let the chlorinator do...

Pressure on output of heater greater then the pressure after the pump. I tapped the line on the output line of the pump going into the filter. I then tapped the line on the output line of the heater. When I have the lines open the line from the pump runs slow but the line coming out of the...

I don't use your method I use Triclor tablets in a chlorinator, start with no CYA it builds gradually but never gets too high. I use a taylor dpd comparator for CL and PH. With these high levels I know I need a titration kit. I went to the store because they are better equipped then I am at this...

local pool store

Okay I see that so just added 6 Gallons more should hit around 30 ppm.I used to be good at this and haven't had this trouble in a while. Do I have to worry about too high CL level in a vinyl pool.

Came home from Vacation and the pool was a deep green. My children added 2 packs of shock Level was about 4ppm on Saturday I added 2 Gallons of Liquid Chlorine and one pack of Calcium shock that brought the level up to 8ppm. I then added 5 Gallon of Liquid 15% chlorine. Ran the filter Saturday...

Your Combined Chlorine was 1 ppm where .2 is the limit you are locked in combines and shocking should have cleared the pool. If you leave the solar cover on the chloramines can't gas off and remains in the water. Now it seems you can't filter the water because you lowered it to paint. When you...