Search results

Thanks all…ordered the ProTuff pole and brush. Just hope it’s long enough, otherwise I’ll be laying on my belly while brushing the deep end 😂!

We’ll be having our gunite pool resurfaced this spring, and need to upgrade our pole and brush in anticipation of the daily brushing. Looking at the Pro Tuff, but worried that even the 16’ may be too short (our deep end is about 10’). Any recommendations for top quality equipment that won’t fall...

Thanks Joyful Noise -- our plan is to do a sheer descent. And yes, we're right about at the easement with the edge of the pool, so I guess we won't be able to go back any further. My husband will be pleased that his banana tree gets to live :)

Thanks...I'll check with our pool guy to see how much we're talking about. He will have to do some destruction/reconstruction to move the pipe, so who knows. I guess I was kinda hoping there was a faux stone wall that could just be placed over the existing wall, lol!

Thanks…there is about 3 feet of clearance between the back of the wall and the property line fence. And my husband’s beloved banana tree is right behind the wall, so I would have to do some major convincing to get him to tear that out, lol! The wall itself can’t be removed (I don’t think)...

We’ve hated this water feature since we built the pool. Long story, but PB added it on for free due to issues with our build, and it’s not what we wanted. Now that we’re renovating, we‘re going to convert the single pipe fountain into a waterfall coming out higher up between the tile and...

Thanks all! We're located in Virginia and, according to all predictions, are expecting a rough winter. Our pool is totally closed with all pipes plugged, etc., and a Loop-Loc cover, so is kind of a pain to cover and uncover! Think we'll wait until spring...

Waiting on a quote to replace the tile, coping, and replaster our gunite pool, and just trying to figure out the nuts and bolts of timing. We’re scheduled to close the pool for the season October 1 (yes, this Monday!) and planned for work to be done after. Our original plan was to do the work...

Thanks Allen…makes me feel an eensy weeny bit better :)

To be honest, I don’t remember when we replaced the cell, which tells me it must have been a while! Serial # is 3E13288-200924. Does that mean it’s from 2009?!?! If so, I certainly can’t complain about having to buy a new one!

I’m pretty sure I know the answer to this, but wanted to double check before I toss out close to $1000. We have a Aqua Rite turbo cell T-15, with check salt and check cell lights on (not blinking). Cleaned cell to no avail. Salt is showing as 2300, but test at pool store was 3600. Total chlorine...

It’s not even in the pool! Just took it out of the box and trying to do it in the comfort of our family room ?

Ok, am I missing something here? Went ahead and purchased the 3900 to replace our broken 380, took it out of the box, and neither I nor my husband can unhook the quick connector! It absolutely won’t budge...almost like the pieces were mistakenly welded together. Like I said, we had the 380 for...

Thanks...I was looking at that one and intrigued. Do you know approximate cost? It’s not sold online so unable to get pricing on it. Polaris Days is this weekend at our local pool store, so hoping there’ll be an additional discount ?

Our Polaris 380 has been struggling for the past season or two, and tired of replacing multitude of parts every year. Looking for recommendations for a new pressure side cleaner that’s relatively durable and will do a good, thorough job of cleaning leaves and debris in our gunite pool. I know...

After nearly a decade of service, our Polaris 380 seems to be on its last wheels. Looking to replace, but not sure what to get without breaking the bank. Should we just get another Polaris or is there something better out there in the same price range? Thanks for recommendations! Edit: realized...

Just opened our pool last week, it's cleared up beautifully so I turned on the SWG. Just checked on it (it's been on 24 hours) and both check salt and inspect cell lights are lit steady (not flashing). I know the cell is clean, and we had just replaced it last summer. Yes, salt level is low...

The night before we left town for vacation, we noticed a pretty significant leak in one of the pipes. With no other alternative, we called the pool co to repair and turned off the pump so that it didn't run dry before the leak was repaired. When we got home a week later, there was, as...

Update #2 -- after DH left the house, I took another look at the hose and assembly. Something just didn't look right. Came inside, pulled up a YouTube, and realized that when DH replaced the backup valve a couple of weeks ago, he put it on backwards! Only thing that saved a modicum of his...

Update -- took it to the pool store, they looked inside and everything was ok. Did find a little piece broken off the housing, so we replaced housing and it's better -- at least it's not falling over on its side -- but it's still going in circles. Hose is floating, not sinking, and all floats...

We've tried all the troubleshooting tips, and while all wheels move when one is turned, the front wheel moves with a little hitch, not smoothly. I suspect this is the issue, but does it indicate a drive belt that needs to be replaced or is it the actual wheel or wheel assembly?

Oops...it's the o-rings that need to be replaced, not valves!

Pool guy just came this am to replace our pump, which was suffering a slow painful death. New pump is working beautifully, but of course when he turned the system on water started pouring out of the top of our sand filter -- diagnosis bad valve (I think that's what he said, but I was still...

Thanks all.... I had turned the Aqua Rite back on about 24 hours after adding the salt, which is when it gave me the 2200 reading. After doing some Internet searching, I found I could recalibrate the unit by switching display to the "instant salt reading" (5th press of the button, as mcmeekin...

Ok...added some salt to the pool. Aqua Rite went into generating mode and salt level went to 2200, then "low salt" and "inspect cell" (steady light, not flashing) came back on. Did a salt test strip that read 3100. Is this just a matter of the Aqua Rite being out of calibration? If so, how can I...

Thanks for all your advice. Jeffhask, this sounds like it may be what our system is doing. I'll go buy some salt today and see what happens. Hopefully that's all it is...

We have an Aqua-Rite salt generator, and the "inspect cell" light is on steady. Took it out, inspected it, and not a grain of scale or sediment in it (it's only 2 years old). Cleaned it just to be sure, reinstalled, and it's still reading "inspect cell" with a steady light. Salt reading also...

Since my hubby refuses to get a real pool boy, we just call our Polaris Carlos. Still haven't figured out how to get it to bring me drinks, though.

Well, I thought everything was working okay when hubby started it back up, but then we noticed a HUGE water loss from the pool (about 2 inches over 24 hours in 60-degree, low-humidity weather). And, of course, the water was still draining from the pump basket every time the pump shut off. Called...