Search results

@Rodex Hello - Sorry to hear about your experience. I'll relay these concerns to the warehouse manager. We'll obviously take care of this and get a new motor and seal shipped. What is your order number?

We emailed your yahoo account earlier today. We've decided to make things easier for you. A full credit has been issued back to your card. It may take 24-48 hours to show up on your end. You can keep the impeller from the original order. We won't need it shipped back. Again, we apologize for...

Thank you, Newdude. We're not perfect and mistakes happen, but we don't want anyone to walk away with a bad experience.

Hello Beatle - Reading through this thread, it seems like there was a lot of confusion. I found your original order for the 35-5074 impeller. This would go to a 1HP full rated or 1.5HP uprated motor, which appears to match your new 2-speed motor. That impeller would require a new diffuser, part...

Hello Countryboy19 - We apologize for any inconvenience you experienced. I'll try and touch on everything that was mentioned in this thread. The stock of Jandy valves was depleted back in February after the Texas freeze. The lead times that we were being quoted were 8-12 months. The vast...

Cowboycasey is correct about how the V-green would be controlled by automation. You would need the 2.7 ECM27SQU if you go the route of replacing the motor. I'm double-checking with Century to see if the automation adapter is still required with the latest versions of the 2.7 V-Green. I'll keep...

Hello Brian - I'm sorry to hear that you had a bad experience. There is a lot to address in your post. This has not been a normal spring/summer for Inyo. First, we have a very small staff that is working remotely. Normally we would have hired several seasonal employees to help with phones...

It looks like you have a Hayward SP715 series valve. You can try rebuilding it with the APCK1034S kit. It includes the spring, washers, o-rings, and spider gasket. Taking the top assembly apart isn't always the easiest task. Another option is to replace the top assembly of the valve. The top...

The cupro-nickel is not necessary if you stay on top of your pH. If you let it fluctuate and don't test regularly, the cupro-nickel may be the way to go.

We were able to source the F-3001 float. It would be $21.99 plus $6.95 shipping. Free shipping on parts is offered if the order is $25 or more.

We don't currently have individual parts for the Blue-White flow meters. Did Blue-White give you a part number? I can try and source one.

Ajw22 is correct. All you'd need is the PT-6000 and 3 Treo LED lights. It is as simple as fishing the new light cord back to the PT-6000 control.

Hello Grenademonkey - I believe you asked this same question over on the Inyo site. The variable speed motors, like the v-green, are not compatible with the Northstar. However, there is a dual speed option. Your current motor is a full rated 3/4HP single speed motor. The closest dual speed...

It is doable on most Esther Williams pools. Does it look like you can remove the bead receiver?

If you look close at the second picture you can see the Hayward logo and the model SP1070.

It looks like you have the Hayward SP1070 skimmer. The replacement weir is part number SPX1070KHR.

Hello Afreil - I was communicating back and forth with you. You must have spoken to another Inyo rep as well as me. The one I ended up recommending was the Pentair Whisperflo WFDS-24. That's a 1HP 115v 2-speed pump. I couldn't find a low speed power curve for the 1.5HP 2-speed Hayward...

If you can remove the bead receiver, I'd recommend a j-hook/unibead type liner. Those liners have a thick rubber hook at the top that hangs on the pool wall. They are easy to install and you don't have to worry about using the liner lock or popsicle sticks. The downside is that you have to...

It looks like you have an older Vogue Forum model. Vogue stopped making parts for that pool several years ago. Unfortunately, they don't offer compatible replacement parts. We have seen pool owners take existing parts to a metal shop in order to make replicas. My suggestion would be to start...

It looks like you have a Vogue Prima. What is the size of the pool? What parts do you need to replace?

It looks like you have an Atlantic Concorde model. The beige upper cap is part number 1490546. The beige lower cap is part number 1490520.

I would agree with that. The sand filter won't work as well with the increased flow. They do a better job when the water isn't being forced through them so quickly.

1) Someone may have been confused about the question. You can use a pump that's higher than a 1HP on an above ground pool. 2) You can use a 1.5HP Pentair Dynamo pump. 3) Pentair packages the 1.5HP Dynamo with their SD40 sand filter. So those two items will work together. However, a 1HP is more...

It is an A & A Manufacturing item. The part number I came up with is 522491. It's the Quick Clean Leaf Vac Lid.

I don't recognize it but I can do a little research. Could you post a picture of the hole that this covers and maybe a picture of your equipment pad? Are there any part numbers on the lid?

It looks like a common filter that was imported from a Chinese manufacturer and sold under a ton of different names. InyoPools.com has a part breakdown of this model.

The discount code is a one-time reward. @Leebo I'm not getting emails when I'm tagged in a thread. I've gone through the settings but I must be missing something.

Yes, they can be installed vertically.

If you need a 2" slip x 2" slip x 3/4" FPT reducing tee, the part number is PV402248. That part will allow you to thread in a 3/4" booster pump fitting.