Search results

Also, just curious do you know what 3" pipes that split into 2 - 3" pipes in the deep end that are labeled "Pool Scrub" are for?

Ok so I don't have to worry about getting enough water to the waterfalls. Do I need a rock catch behind each waterfall or because it's already going through filter do I not have to worry about that?

@ajw22 Thanks for all the info. Just spoke with the plumber onsite and he is doing dual 2.5" suctions in case I do want to add a 2nd pump later dedicated to the waterfalls. I believe they are having everything go out through the filter and then out. However, you brought up another question...

Ok so the trenching team showed up to do the trenches and lay the water piping & electrical pipes. They said it should take them about 2 days. A few questions regarding this and a couple other things: 1.) They are running 2.5" pvc pipe back to where my 8' ft. rain descent feature will be...

Ahh good one ok. thanks

Ya I knew it messed with PH but just wanted to be sure it didn't mess with anything else. Thanks!

Do sheer/rain descents only throw off a pools PH when ran or can it mess with other pool water parameters? Thanks!

This might help sheerdescenttech.pdf (bestbuypoolsupply.com)

Why won't a Pentair Intelliflo VSF work? You can control the speed or the GPM on it which should work fine for water features and it has 3hp which is more than enough right?

Oh these are awesome!! Thanks so much!!

@nikilso your saying if I use the rectangular square which is our plan then to use a single row and connect them to where they are a single tile spaced out about a inch or 2 from the next? Thanks!

I have another question this time regarding pool tile on steps as accent pieces. We are doing krystalkrete quartz bottom and we were told it's no extra cost to cut some of the tiles and add them in as accent pieces on steps. However, we were also told by a friend that outting tiles into...

So somewhat good news I think. Just spoke to pool builder and they confirmed 100 ft. Of electrical is included. What gauge and all that is still to be seen or if they will run whatever is required for my setup. Standby.

It's copper with aluminum ground OMG I just noticed that when you said it!! Noooooooooo :( For some reason I thought it was copper :( So good news is the PB gives us 100 ft. included but it's probably for 6 or 8 awg wire and 1" comduit. I'll have see after subtracting that how much more it...

So I do have 6 awg wire in the grey sleeve as per the pic. It doesn't run in conduit at all. The home us a new 2 story and when they built it the ran this grey sleeve wire from the main panel to the other side of the house between the 2 floors. See picture. I know electrician can tell me...

Thanks for the info. So question where does load calculation come in? Does load calculations use watts determine breaker size? If so I'll be using about 11,000 watts divided by 240v that would be rounded up a 50amp breaker to feed the subpanel right? This is what I've seen in load calculators...

Hi All ...need some help with this one. When we built the house we had 6 gauge 220v thhn 2 pair (4 wires total) ran from the main panel across to the opposite side of the home inside the walls about a 65-75 ft. run. Question is can this feed our Pentair Intellicenter 125 amp sub-panel. I plan...

I think you posted this in the wrong spot?

So what do you suggest insted of plain old tile? Is there anything such as sealing them I can do to make them easier to clean off the calcium? Thanks!

Woops didn't realize I losted twice sorry.

So this is the stone going on the wall and the smaller square tiles will go on rounded part on the side raised wall where waterfall comes out. The greenish squares is called verde will be our pool bottom because we had blue on our last pool lol. So talk to me good/bad?