Hi. appreciate any help! im new pool owner and doing everyting on my own. I have a leak in the ball valve that runs to the aerator. Ive been attempting to replace the ball valve but findiing it difficult to attach because not alot of room. there is two jandi valves, one to the salt cell and then returning to the pool and other valve splits off and goes one way to the waterfall that has a 2inch pvc and the other reduceds down to a 3/4inch that goes to the aerator. we litterally never use the aerator becuase we have the waterfall. would it be safe to just capp off the 3/4line to the aerator? if not how do i connect the new ball valve with it being such a tight fit?
capping off aerator line?
- Thread starter missvernon
- Start date
- Jun 22, 2014
- 48,010
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Welcome to TFP! 
With a pool's pH level constantly trying to rise, an aerator of any kind would seem to be a nagative only contributing to a rising pH. I would be inclined to cap it off. But it may help if you could post a pic or two of this aerator line and perhaps the equipment pad/valves related to it's connection just so we can see everything. Also take a moment to update your signature with all of your pool & equipment details. See mine as an example. It will help with future questions.
Enjoy the forum.
With a pool's pH level constantly trying to rise, an aerator of any kind would seem to be a nagative only contributing to a rising pH. I would be inclined to cap it off. But it may help if you could post a pic or two of this aerator line and perhaps the equipment pad/valves related to it's connection just so we can see everything. Also take a moment to update your signature with all of your pool & equipment details. See mine as an example. It will help with future questions.Enjoy the forum.
