Had a pump added for deck jets. However, the app does not turn on the pump, have to do it manual. How do I add aux1 to the app?
Aux1 pump added to App
- Thread starter The303
- Start date
303,
I assume this is a single speed pump.. Is that true?
I assume that you have the pump's AC power cord, wired to the load side of the Aux 1 relay. And that you have constant AC power to the line side of the Aux 1 relay.
You almost do not have to do anything to make the pump work other than pushing the Aux 1 icon in ScreenLogic, or pushing the Aux 1 button on the main panel.
Are you saying that the pump does not come on automatically run, or that it will not come on when pushing the Aux 1 icon on ScreenLogic?
If you want it to come on automatically, you have to set up a schedule with a start time and and stop time.
What kind of EasyTouch do you have? Show us a pic of the front panel.
Thanks,
Jim R.
I assume this is a single speed pump.. Is that true?
I assume that you have the pump's AC power cord, wired to the load side of the Aux 1 relay. And that you have constant AC power to the line side of the Aux 1 relay.
You almost do not have to do anything to make the pump work other than pushing the Aux 1 icon in ScreenLogic, or pushing the Aux 1 button on the main panel.
Are you saying that the pump does not come on automatically run, or that it will not come on when pushing the Aux 1 icon on ScreenLogic?
If you want it to come on automatically, you have to set up a schedule with a start time and and stop time.
What kind of EasyTouch do you have? Show us a pic of the front panel.
Thanks,
Jim R.
303,
I have an Android and I select Summery then Circuits and it shows all the Circuits,
It will not be listed under pumps.. It will say Aux 1 or if you renamed it whatever name you used.
Thanks,
Jim R.
I have an Android and I select Summery then Circuits and it shows all the Circuits,
It will not be listed under pumps.. It will say Aux 1 or if you renamed it whatever name you used.
Thanks,
Jim R.
303,
It is just there... I did not add it.
You should have a list of Circuits.. Pool and Spa are Circuits and so are Aux, and Feature circuits.
Are you using an apple product? For Android there are two apps ScreenLogic (this is where my circuits are) and SLConfig. Not sure of Apple has two apps or not, but your phone has to show "Circuits" somewhere..
Click on everyone of those tabs and see of one of them does not take you to Circuits. What is under Settings?
Thanks,
Jim R.
It is just there... I did not add it.
You should have a list of Circuits.. Pool and Spa are Circuits and so are Aux, and Feature circuits.
Are you using an apple product? For Android there are two apps ScreenLogic (this is where my circuits are) and SLConfig. Not sure of Apple has two apps or not, but your phone has to show "Circuits" somewhere..
Click on everyone of those tabs and see of one of them does not take you to Circuits. What is under Settings?
Thanks,
Jim R.
- May 3, 2014
- 62,717
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Similar threads
