I have had this pump for a few years but recently had a new light added as just re-tiled and plastered pool. I have been searching the web to see if I can sync or control this pump via an app. I have tried the Pentair app but cannot locate a "connect" button on the pump. Is this a pump that can be controlled by an app? Thank you
Question about app for Sta-Rite Intellipro VSF 356666a
- Thread starter progturner
- Start date
P,
That P/N is not for a StaRite pump.. Maybe a control head???
Look to see if you can find the actual pump number.
It will be 013075 or 013076 if it can be controlled by an app.
Thanks,
Jim R.
That P/N is not for a StaRite pump.. Maybe a control head???
Look to see if you can find the actual pump number.
It will be 013075 or 013076 if it can be controlled by an app.
Thanks,
Jim R.
Intellipro VSF (356666A) Shuts Down above 3000 rpm
Hi, I was trying to get a little more pressure in the jets of my SPA, but the pump shuts down after a few seconds if I set the rpm much above 3000. It should go to 3450. I thought maybe the pressure got high due to obstructed flow in SPA mode, but it shuts down at these rpm's even in POOL...
www.troublefreepool.com
Intelliflo VSF 011056 vs Intellipro VSF 356666.A...same thing?
I'm sorry, folks, I am just very confused by all of this. I want the Intelliflo VSF 011056 as it's come highly recommended all over the place (including repeatedly here) and potentially integrates with my home automation. An installer friend of mine is suggesting a Sta-Rite Intellipro VSF...
www.troublefreepool.com
That's the label part number.
Show all labels on the pump.
I guess I should have said, for it to be an IntelliPro3, and be controlled by an app, it needed to be one of the two pumps I listed...
Jim R.
Jim R.
