I recently had a Pentair Suplerflo VS pump put in to replace a single speed pump that died. The only issue is I cannot control it through my Pentair Easy Touch system or Screen Logic app without using an external cable and connecting it to relays. My problem is as you can see there are only 4 relays. It looks like I have the space to add 4 more relays and on the board I have slots to connect them (J12-J15). Is it as simple as buying more relays and connecting them? If so does anyone have part #'s for them (3HP?)? Or am I missing something else?
I also know I do not need to add all 4 speeds to my system but I'd like to add at least two. I was thinking on whether I could keep my current configuration. I no longer use the Cleaner so that's one relay available. I'm assuming I'll need to keep the Filter Pump relay, that when I do programming it will have to be on for as long as I have the vsp running as well as programming the individual relays to come on at different times. Although now that I think about it, my SWG is connected to the Filter Pump relay so I will need to keep that one. Guess I'm back to adding more relays if possible.
Any help would be appreciated. Thank you!
I also know I do not need to add all 4 speeds to my system but I'd like to add at least two. I was thinking on whether I could keep my current configuration. I no longer use the Cleaner so that's one relay available. I'm assuming I'll need to keep the Filter Pump relay, that when I do programming it will have to be on for as long as I have the vsp running as well as programming the individual relays to come on at different times. Although now that I think about it, my SWG is connected to the Filter Pump relay so I will need to keep that one. Guess I'm back to adding more relays if possible.
Any help would be appreciated. Thank you!
