Quartz Plaster Discoloration where return jets are (UPDATE! weird pipe insert? what is this?)
- Thread starter JHUB
- Start date
- Jul 21, 2013
- 65,894
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I don't really see a problem in your pic. Can you better point out the differences you see.
@onBalance
@onBalance
The water coming out of the jet is wearing away the plaster cream and increasing the exposure of the aggregate. Point the jet upward and perhaps take some sandpaper to it if it is rough to the touch.
Thank you onbalence,
right now it is just a smooth wall 3/4" pipe, what can i put in there to point it up?
Attachments
- Jul 21, 2013
- 65,894
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Your builder should have used threaded returns to fit eyeball returns like these....
www.troublefreepool.com
I am not sure what you can put in there now if your builder used 3/4" pipe.
Hayward Inlet Eyeball Removal - Further Reading
www.troublefreepool.com
I am not sure what you can put in there now if your builder used 3/4" pipe.
My spa has the same pipe and right after the build I noticed one of the jets had more flow than the others the pool guy checked it and put a tool into the hole and said there was no insert in that one so he put one in and fixed the issue. Does anyone know what he put into the hole could have been? I think if he could put an insert in to reduce flow or redirect it I can put something in these baja shelf holes to redirect the flow better.
correction, I found some photos of the build it is 1" sch40 pipe.Your builder should have used threaded returns to fit eyeball returns like these....
Hayward Inlet Eyeball Removal - Further Reading
I am not sure what you can put in there now if your builder used 3/4" pipe.
Similar threads
