Posted a bit back, got my TF-100 in and tested. Any suggestions on which way to go?
I honestly am kinda guessing on the PH. I am not color blind but it gets hard for me to read. I attached a picture.
FC - 13.5
CC - 0
PH - 7.6
TA - 60
CYA - 50
CH - 0 (I am assuming this is correct. It did not turn red)
Chlorine is obviously super high? When I shocked it a while back, I put to much. I thought the scoop was a 1lb scoop but hindsight it was a 24oz scoop. So, I put 3.75lb in a 28,000 gallon pool and it should have been 2 1/2 pounds?
IC40 SWG is running at 40% 24/7. Water is still about 63 degrees.
Any suggestions?
I honestly am kinda guessing on the PH. I am not color blind but it gets hard for me to read. I attached a picture.
FC - 13.5
CC - 0
PH - 7.6
TA - 60
CYA - 50
CH - 0 (I am assuming this is correct. It did not turn red)
Chlorine is obviously super high? When I shocked it a while back, I put to much. I thought the scoop was a 1lb scoop but hindsight it was a 24oz scoop. So, I put 3.75lb in a 28,000 gallon pool and it should have been 2 1/2 pounds?
IC40 SWG is running at 40% 24/7. Water is still about 63 degrees.
Any suggestions?

Last edited: