Recent content by Tony'sPool

I did, thank you - i'm not yet familiar enough with programming the software to understand what "buttons" you're referring to. I'll keep messing around with it until i figure something out.

corrected. Thanks.

270 - does it not show up in my signature?

Hi All; I was hoping one of the Jandy pro's could help me. I have a schedule set-up with my Jandy VSP and i'm running at about 1,000 rpm for much of the day and then about 4 hours at higher speed in the afternoons. i'm wondering if there is a way to set a one touch button so that I can run the...

Thanks so much!

i didn't let it warm but will test again tomorrow with some pool water that i'll leave inside over night.

i'm about 18,000. i used the TF Pro test kit and i was off the chart, i also used a digital reader and it read like 10.5/10.6? does that make sense?

I also tested CYA and filled the tube and could still see the black dot, so it appears i'm at less than 30? Looks like i'll need to add some stabilizer also.

Hello; I'm a new pool owner and pool construction was completed very late in the season last year. I just opened the pool this morning and things actually look pretty good. Needed to add some water so i was running pump on main drain to get the water moving through the filter and vacuumed and...

Newbie here, but i've been doing a lot of research and thought it might be a good time to start posting. You can cap each end of the piping to keep critters out, however most manufacturers make a "dummy cell" that can take the place of your SWG (with a perfect fit) over winter and that will...

Good Morning! I'm new to TFP and a first time pool owner. We purchased a home in June and had a local pool company install at 34x16 gunite pool. What a project and some frustrations along the way; mostly around lack of communication. I had them service the pool for a VERY short season and...