Recent content by TexP51

Got 3 years out of my PB4SQ before pump housing failed. Polaris wouldn’t stand behind by the unit when contacted. Feel they should be offering a recall for a defective design, plenty of companies do the right things these days. Overall liked the PB4SQ as a booster pump for efficiency and good...

I did a Pentair conversion w/ 522046 back in Oct 22 to upgrade from Easytouch to Intellicenter. All has gone well and pretty happy with system. Came back from out of town yesterday and noticed pool cleaner running when it shouldn’t. The pool main pump is running fine on its schedule, just...

I replaced $50 worth of breakers yesterday. My Easytouch was wired to power each relay from a sub panel breaker with 240v 30a dual-pole running the filter pump and booster pump, 240v 20a dual-pole running Superflo for waterfall, and 120v 20a single pole running easytouch and pool light. I...

Pics of salt card

Appreciate the help Mr. Jim. I went through the Easytouch 8 yesterday. This is a 2008 production version with breaker buss in the lower middle of the cabinet. I removed the salt cell and wired Pentair controller from the data port, and it made no difference. The Intelliflo still is running...

Appreciate the comment Jim - you are correct. When working correctly the Intelliflo reads ‘Display not Active’ if connected to the data cable. I’ve removed the cable ends at the pump and automation, used contact cleaner, and no go - pump still runs on its own. even though the pump is only 6...

Could use some pro advice - We have a 35,000 gal salt water pool without spa built in 2009 in Houston area. Easytouch 8 automation drives a Intelliflo for filter pump, whisperflo pump for water fall and Pentair booster pump for cleaner. The wired Easytouch inside the house panel currently...