Recent content by Tamlibtoim

I prepped ground pretty much the same but I cheated and paid a landscaper to do it. After I dug out a 22’ round patch of grass they leveled it with sand and some metal landscape support barriers. I used a gorilla barrier but didn’t use pole supports. I put a plastic landscaping barrier...

I don’t know if this is the same type of thing you want but check out the aquabot S2-40i pool robot. It does not need to work with your pump or filter it has filter bags and it’s own propulsion system. I have had really good luck with it .

If it’s cooling after he added refrigerant it will not be the TXV. If it were, it would still not be cooling. You definitely have a leak, should not have to add refrigerant especially if it was cooling fine before. Most likely leaking in the evaporator coil, almost all manufacturers have issues...

Sounds like you’re getting a 12° split, that is still not enough to cool efficiently. Hopefully you have a parts and labor warranty. Even if it’s under a part warranty you may still have to pay for labor.

Compare the temperature of the air going into your return where the filter is, to the air coming out of the nearest register. It should be a 15 to 20° drop. Based on what you were describing it sounds like you might be low on refrigerant with a 65° temperature at the registers even though the...

Hey all! Lurker here on the forum for a while and my 2nd year setting up a Intex AGP 18x48 ultra. First year went really well thanks to all the great info here. Major rain close to the end of summer last year had me fighting an algae bloom so I drained it. Had major plans for this year...