- Jun 7, 2017
- 9,999
- Pool Size
- 29000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
2 years ago I had my 17 year old A/C systems (2) replaced from builder's junk (Bryant) to top of the line Lennox. Last year was no issue. This year it seems the room won't stay very cold. I usually set it at 68 at night and once we are up it goes to 76. I have it crank back down to 68 for sleeping at night. It was not getting to 68 so I changed the schedule so it would only go to a high of 73. All day yesterday it ran from morning until night slowly increasing temperature in the room. By bedtime it was around 79. Then it slowly started going down again by the time morning came around it was finally at 68. I measured the temp coming out of the vents and it is not bad at 65 (outside temp is 90ish). Air flow seems normal. Filters are replaced regularly. This is an attic unit the attic gets hot but this has never been an issue before. It is under full warranty for 10 years so I called and they are coming tomorrow to take a look. Any ideas? I can not stand to sleep when the room is sweltering hot I am dying over here! The main floor A/C has no issues it works like always.