Recent content by kuzya

instructions say if CC is above 0.5 or FC is zero. my FC is zero - looks like I need to follow your advise and SLAM. Thanks. I will report back.

I am sorry, made a mistake above: TC and FC are 0. i understand why you told me to SLAM.

I took the water to the store and also used a test kit I have.

Hi Everyone. I am having an issue with my inground pool. I opened it a couple of weeks ago and followed SLAM process. The water was black/green initially. Here are the latest results: Total Chlorine 2.0 Free Chlorine 2.0 ph is 7.7 TA is 115 CH is 50 stabilizer is 0 The water is still very...

I didn't use the fireman switch. I connected all three devices to the switch. The only thing the heater has a double pole switch between the heater and the timer. It is working. Thank you everyone.

Let me give you more information: I had an old pentair minimax heater. It died and I replaced it with Hayward H400FDP heater plus I added the SWG. The breaker is double pole 20 amp. I have the T104R201 timer enclosure. The two hot wires from the breaker are connected to 1 and 3 (Line) The two...

the only problem with the heater not on the same timer as the pool pump is that fire switch will not work. pump can shut down and the heater can still be running. I will have a switch for the heater so that can shut down power to the heater from outside without shutting off the main breaker...

I like that idea. I will wire the heater to bypass the switch and use the wire that goes to the switch from the heater to connect SWG. should I have an extra on/off switch on the control panel for the heater o just hard wire to the junction box? What do you guys think? thank you!

Hi Everyone, I purchased an SWG and would like to install it this week. I also purchased a new Hayward heater and need to reconnect the wiring to the switch from the heater. I had a very old Pentair heater before. The old heater and the pump were both connected to one Intermatic timer -...

Found another valve. Pentair 261177. Looks like it will work with my filter. Not sure what is different from P/N 263081.

Hi, I have a few questions about changing the plumbing setup on my inground pool. I have an FNS Plus 60 DE filter. The filter has an old style valve that you pull up to backwash. The valve broke on the outside and the whole connection to the filter has to be replaced. The input for the filter...

Thank you. I found this manual. It looks like it could be: 1 d . Dead A. Miswire B. Transformer bad C. Fuse/Circuit breaker bad D. Bad control I will check the transformer. I am getting power before the transformer so it is not circuit breaker.

Hi, I purchased a house this year and it has pool with a pentair heater. The model # 300 DV. The heater would not turn on, the control panel doesn't light up. I looked at the switch on the bottom and it is broke (on, off switch). I bypassed the switch (connected black to black and whit to...

ok. I made some progress. Fixed the pool heater connection and installed the hayward in line chlorinator. Nothing is leaking. Pressure is ok. Pool is not green anymore, the water is almost clear. Results from the pool store. I have a pool kit but it is at the other house. Ph is 7.7...