Hi Everyone,
I purchased an SWG and would like to install it this week. I also purchased a new Hayward heater and need to reconnect the wiring to
the switch from the heater. I had a very old Pentair heater before.
The old heater and the pump were both connected to one Intermatic timer - 104R.
There is also a fireman switch so that the heater shuts off 20 min before the pump.
I understand the SWG needs to be wired with the pump, both would come on at the same time.
Is it possible to connect all three to the same switch?
Also if I connect it all to the same switch - does it that mean that the heater will always come on when the pump is running?
This is not ideal because of the pool opening, pool closing and sometimes the water doesn't need to be heated.
Thank you.
Victor
I purchased an SWG and would like to install it this week. I also purchased a new Hayward heater and need to reconnect the wiring to
the switch from the heater. I had a very old Pentair heater before.
The old heater and the pump were both connected to one Intermatic timer - 104R.
There is also a fireman switch so that the heater shuts off 20 min before the pump.
I understand the SWG needs to be wired with the pump, both would come on at the same time.
Is it possible to connect all three to the same switch?
Also if I connect it all to the same switch - does it that mean that the heater will always come on when the pump is running?
This is not ideal because of the pool opening, pool closing and sometimes the water doesn't need to be heated.
Thank you.
Victor