Recent content by drmnjms

Got it. Thanks guys.

Anybody ever use their existing inline chlorinator for liquid instead of tablets?

So I replaced the spider gasket on the multiport valve. Working like a champ. Bringing levels back up and will soon be making big splashes all summer long. ? Thanks again!

Valve is leaking to waste, I'm replacing the o-rings this week. I'll update afterward. Thanks for the insight.

I have a sand filter.

Hey guys. I have a brand new liner in the pool. Everything's ng was going great,then all of a sudden my water level started falling rapidly. The level dropped almost three inches in only a couple hours. I filled it up and let it sit overnight with no level change. I turned on the pump, and now...

Thank you very much.

Hey everyone, I'm sure someone has asked this question, and it's been answered, but I can't find it in here. So here goes...When adding CYA both liquid or dry form, what is the best method?

Ajw22, I'm not sure how long it's been installed, the pool was already in when the house was bought. If I had to guess, probably several years. It's been rebuilt and re-sealed several times.

I am considering the robot. I have looked at the Dolphin Nautilus CC Plus. Any thoughts or suggestions?

Need to replace my Polaris pump. I have a pressure side cleaner, I believe the model is a 380. My question is, should I buy the Polaris brand pump, or is there a better pump that will give longer service life?

Thanx

Just rebuilt my Polaris 380. Put it in the pool, it started doing great, then it got to the shallow end of the pool and got stuck against the wall, the back up valve engaged, pulled it away from the wall, but it went right back and got stuck again. I've slowed the rpms with the red disc, tried...

Will do. Thanks.

Over a 3 day period roughly one half to an inch