Hey guys. I have a brand new liner in the pool. Everything's ng was going great,then all of a sudden my water level started falling rapidly. The level dropped almost three inches in only a couple hours. I filled it up and let it sit overnight with no level change. I turned on the pump, and now the level is down again. It seemed to only be falling while the pump is operating. Anyone ever had a similar problem or have any thoughts?
Water level falling
- Thread starter drmnjms
- Start date
- Jul 21, 2013
- 52,474
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- May 3, 2014
- 58,363
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
What kind of filter do you have? A bit more detail in your signature really helps us help you.
- May 3, 2014
- 58,363
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Valve is leaking to waste, I'm replacing the o-rings this week. I'll update afterward. Thanks for the insight.
- May 3, 2014
- 58,363
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
We are glad you have found our information helpful. Please, if you can, consider making a donation to TFP.
We are staffed by volunteers and are registered as an IRS 501 (c) (3) charity and donations are what keepskeep the forum operating without advertisements.
Support TFP!
So I replaced the spider gasket on the multiport valve. Working like a champ. Bringing levels back up and will soon be making big splashes all summer long. ? Thanks again!
Similar threads
