Recent content by cmooty

  1. C

    Chlorine Genie

    Searched the forum and found a 7 year old thread on this. I'm wondering if anyone has recent experience with these. I've been fighting a Jandy Aquapure 1400 for years, and I called a pool tech today asking for options on a change. He threw out the idea of the Chlorine Genie. Googling, it...
  2. C

    Jandy Aquapure 1400 has me pulling my hair out

    Coord was replaced as well. No corrosion or leakage. Tested salt with a test strip. Reading is 3300 ppm.
  3. C

    Jandy Aquapure 1400 has me pulling my hair out

    Guys, at the tail end of a frustrating summer, I thought I had beat this thing into submission. I’ve been through green pools, a new cell, and a new back board, and everything was looking ok. Now it’s giving me a 123 code again. Cell is clean. Ran the Jandy troubleshooting with my meter. The...
  4. C

    Which security camera to choose?

    For just audio, an Alexa echo dot would work, for video too you could do the Alexa monitor, sorry don’t know the name. With the Alexa app, your cell can talk to Alexa devices.
  5. C

    Water feature won't prime

    Ended up having to replace lid, now it works like a champ.
  6. C

    Water feature won't prime

    My system has a water feature pump with its own suction, feeding diverter valve to two falls, or two vertical jets in the splash pad area. Lately the system will not prime. I've checked and lubed the filter basket lid seal, but no change. If I shove a hose in the suction line, I can back fill...
  7. C

    Rust seepage from surround

    Sounds right, any thoughts on further prevention?
  8. C

    Rust seepage from surround

    I'm not sure, pool came with house.
  9. C

    LED Pool Light

    Pictures will likely be needed, but I can say that I've gone through two sets of Jandy lights in 4 years, so don't hold your breath.
  10. C

    Rust seepage from surround

    So I have a concrete surround on the pool. In a few areas either above the water line, or on the horizontal part of the coping, there are rust stains. I'm guessing this is coming from regarding in the concrete. Pictures below. Any thoughts on how to deal with this?
  11. C

    Which led light?

    I will say stay away from Jandy nichless less. Unless you like changing lights once a year.
  12. C

    Jandy JEP2.0 with aqualink RS controller won't run at variable speeds

    Hello all, I recently tried to set my pump to run at a high speed for vacuuming out the spa, but when I choose a different speed setting on the Jandy PDA, it prompts me to change the RPMs if I choose to. Whether I change from the default or not, the PDA indicates a change (x moves from pool to...
See more
Top Bottom
Back