Latest activity Postings Media About
-
-
clambert1273 replied to the thread Refill Inquiry.I will say in AZ, I can't be below 80 cya without losing TONS of FC. Even now in April and I'm only at 40 and doing a SLAM, loss to... -
clambert1273 replied to the thread Need new pump but am unsure about VS pump.My pump gets full power from the timer just has to hook on the correct terminals and my swg goes onto the load terminals but I don't...
-
clambert1273 replied to the thread When do you turn on your heater?.Lol High 70's is my winter 😂😂
-
clambert1273 reacted to Newdude's post in the thread Wood Under Intex Rectangle Pool Legs with
Haha.
Mine had to pee both times. Try to avoid that just in case. 😁 -
clambert1273 reacted to Newdude's post in the thread Let’s see your water after removing winter cover!! **RESURRECTED FOR 2025!** with Haha.
I get 10 lashes with a wet noodle for not getting a pic, but i was too busy dry heaving, so. I had a ridiculous amount of worms...
-
clambert1273 replied to the thread Is my pump strong enough for my new pool?.These guys here can teach you your equipment. I wouldn't trust anyone else and many have helped me with my equipment over the years...
-
Download poolmath from here.
-
clambert1273 replied to the thread How much chlorine to store.My pump runs 24/7 I have it at varying speeds on a cycle. My timer was there before and when we got the house has an old single speed...
-
clambert1273 replied to the thread How much chlorine to store.At the time, I was gonna have my SWG at certain times but then just left it on at lower %
-
clambert1273 reacted to Sarah and Nate's post in the thread Happy 2025 nice to hear from you again with Love.
Hey Monte, not sure what’s happened with your original order but I’ll send another. If you happen to end up with two I’d appreciate you...
-
clambert1273 replied to the thread How much chlorine to store.Trace the wires back to the item? It's what I would do
-
clambert1273 replied to the thread How much chlorine to store.Similar to my setup then. Pump is on 1&3 for constant power line & my swg controller is on 2&4 which is the load to timer. I just keep...
-
clambert1273 reacted to Jimrahbe's post in the thread Tight on space, recommendations on how to install a SWG? with Love.
Sir, Why not put the cell in the line between the heater and your Return valve?? Then it could be used for both the spa and the pool...
-
clambert1273 replied to the thread Tight on space, recommendations on how to install a SWG?.My edge40 is vertical and does well Let's get others more mechanical than I 😁 @Newdude @Texas Splash @PoolStored
-
clambert1273 replied to the thread How much chlorine to store.2&4 are what I put mine on then just leave manual switch to on
-
-
Loading…
-
Loading…
-
Loading…