Recent content by bobby1017

This same thing happened to us back in 2011, they drilled some 1" dia holes to increase the drainage. Finally at the end of may they were able to plaster.

Thanks for the reply, the resistor idea is good, I didn't read this until just now. I did get it working. I first went to setting, then calibration, it only showed pool and air, no solar. I switched the water sensor to the solar, the solar showed 74 so the board was fine, then I hooked the...

My solar temp sensor went on the blink, the temp shoed 255 deg f. I had to change it one other time a couple years back, I bought this, Pentair 520272 Air/Water/Solar Temperature Sensor from amazon, says its compatible with intelletouch, oem Pentair replacement. I hooked it up but now the temp...

up to 72 yesterday pm, solar working.

I had a water issue and the plaster company wouldn't do it until the seepage was nearly gone. We also drilled holes in the side of the shell to help the water drain, I put in an additional french drain above the pool to help, finally they were satisfied and it was plastered about 2 months later...

. It sounds like his drain is not hooked to the pump? only for draining the water.

Me too.

Sorry to hijack but you don't see this mentioned too often. We have backpacked from tuolumne to the valley via halfdome twice and that cascade is incredible, the smooth granite is almost like a pool, and the current a giant swim jet, cold though. Last I was there was 1999. You must have been...

Thats nice, I don't think pentair has that so my pool must be running in order for the solar to work.

72 deg this am, just like I thought it would be. If I'm lucky, with good weather predicted, I may see 76 by this weekend.

Looks really good, is that glass or just the pebble imbedded?

84 yesterday afternoon, weather cooling this week with possible rain on thursday thru sunday, if that happens I'll be stuck in the 70's or worse.

I bought a cover pools cover with my 20' x 40' pool in 2011, it was approx $13,000.

I'm sure nobody has, it was just my way to see if the price / output was about the same, your a little better.

That comes out to 1.31 per kwh for you based on last years production, my cost is 1.50 per kwh based on after tax cost divided by 20565 kwh produced last year.