Latest activity Postings Media Albums About
-
-
Jimrahbe replied to the thread Pool valve toggle switch.Natalie, As noted above, the toggle switch just moves the valve from one stop to the other stop. Usually 180 degrees.. I might add... -
Jimrahbe replied to the thread Breaker trips for IC40.sub, Unplug the SWCG from the bottom of the EasyTouch and see what happens.. If the breaker pops with the cell disconnected, then the...
-
Jimrahbe replied to the thread 38,000 Gallon Pool in AZ - hard to keep balanced.W, If you keep your FC and CYA at the proper relationship per this chart... You should never have to add any pool store shock on a...
-
Jimrahbe replied to the thread Weird Priming Issue.Peachy, You are correct... I was just trying to point out that for 99% of pool owners, it just does not matter. If it works for you...
-
Jimrahbe replied to the thread Testing Salt Water Pools.Kevin, Just to be clear.. Your pool, and your friend's saltwater pool, are both "Chlorine" pools.. Saltwater pools just use the...
-
Jimrahbe replied to the thread ic40 Not Producing.Allan, If the Cell light is green, then the cell should be making chlorine... As a test, set the output to 50% and then see if the...
-
Jimrahbe replied to the thread After pool opening, the filter is leaking around the seam when the pool is spill over mode.C, Sorry I thought you had different type of filter.. I have no experience with that one.. :( Jim R.
-
Jimrahbe replied to the thread 3 position actuator for pump running two water features?.Herman, The OP has a Pool and Spa IntelliCenter, which comes with 4 valve drivers.. Intake, Return, Valve A and Valve B. I 'assume'...
-
Jimrahbe replied to the thread After pool opening, the filter is leaking around the seam when the pool is spill over mode.C, You either did not tighten the band enough or you need a new O-Ring.. Show us a pic of the band fastener.. Thanks, Jim R.
-
I didn't put it together. If i was the one in charge i would use 1 cl580 cartridge filter.
-
Jimrahbe replied to the thread Feedback on Pentair Intelliflo3 VSF.Dan, You can replumb the pad, if it makes it easier to install the pump, but changing the whole pad to 2" will not make any operational...
-
Jimrahbe replied to the thread Maytronic active 20 power supply overheating?.m, I doubt it is a heat related power supply issue. I suspect it is more a bad button issue on the power supply. Where did you buy...
-
Jimrahbe replied to the thread 3 position actuator for pump running two water features?.Utah, Pretty simple fix.. Remove the single 3-way valve/actuator you have now, and replace it with a 2-way valve/actuator on each of...
-
Jimrahbe replied to the thread Feedback on Pentair Intelliflo3 VSF.Dan, The whole point of owning a VS pump is to run a slow as you can and still get the job done.. Plumbing size really has nothing to...
-
Jimrahbe replied to the thread Feedback on Pentair Intelliflo3 VSF.Dan, While the IntelliFlo3 is a great pump, I never recommend buying a small (1.5 HP) VS pump. The larger (3 HP) VS pumps will move...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
