Latest activity Postings Media Albums About
-
-
Jimrahbe replied to the thread Pentair Home app: how to turn on superchlorinate?.Soleen, I have three saltwater pools that I've had for well over 10 years.. In all that time I have never used "super-chlorinate". If... -
Jimrahbe replied to the thread New EVO 614i Robot Pool Cleaner Review.Killer, See post #295 .. for pic... "For those that don't already know, there are three 'grid' patterns printed on the side of the...
-
Jimrahbe reacted to CajunGuy's post in the thread Help...Pentair check valve flapper installation question with
Like.
Ok I'm an idiot. The old flapper's rubber gasket was stuck inside the circle of the housing (think 2 gaskets smushing each other)... -
Jimrahbe replied to the thread Intellichlor IC-40 cell light does not come on amd no chlorine is produced..Tab, How do you have the cell connected to the IntelliConnect? Thanks, Jim R.
-
Seems all is good now hit the breakers a couple times synced them manually and they started working. Not for sure what happened but...
-
Jimrahbe reacted to 1poolman1's post in the thread DE collecting INSIDE the filter panels instead of coating the outside with Like.
Open the filter, remove the grid assembly, start the pump. Does water come up the pipe the manifold is attached to? Valve is plumbed...
-
Jimrahbe replied to the thread Pentair Protocol Adapter red light.If you are getting 5 to 8 years out of your lights, then you "lightyears" ahead of most.. :mrgreen: I measure their lifespan in...
-
Jimrahbe replied to the thread Any harm at running SWG at 100%?.Kul, While it won't hurt the cell, it just does make a lot of sense to me to only run the pump 6 hours a day.. The chlorine you make...
-
The filter pump relay powers the com load and the line side of 2speed relay hi/lo. Unlike a regular relay where it disconnects, it’s...
-
Jimrahbe reacted to crystallake's post in the thread Spa jets stop working for overflow into pool with Like.
Appreciate the responses!
-
Ok...I will try this and get back to you with reply asap.
-
Jimrahbe replied to the thread Spa jets stop working for overflow into pool.Crystal, I assume it was working fine and then slowly the spillover got less a less. This is almost always a sign of a dirty filter...
-
Jimrahbe replied to the thread Help...Pentair check valve flapper installation question.C, Let's see if @1poolman1 has any thoughts on this.. Thanks, Jim R.
-
Jimrahbe replied to the thread Adding Water to Spa in Spa Mode.Don, If you are in the Spa mode and turn on the "Spillway" function, it should just move the intake valve from the the spa to the pool...
-
Jimrahbe replied to the thread Help...Pentair check valve flapper installation question.C, Did you buy a generic replacement or an OEM replacement? Thanks, Jim R.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…