T
Latest activity Postings Media About
-
-
Ttstex replied to the thread Leak suspected in built in hottub.Yes, water from spa (if higher than pool) will move from spa to pool w bad Ck valve. And, if it’s a waterfall from spa to pool, when...
-
Ttstex replied to the thread Leak suspected in built in hottub.what are your daily winds there? Let it get to equilibrium in temps, fill to top, and then note water level How did you calculate 8...
-
Ttstex replied to the thread Brown stain between stair line tiles.Good, but be very cautious in adding any type of metal control, et el...Post this question in the pool chemistry section. Most of the...
-
Ttstex replied to the thread Brown stain between stair line tiles.Have your PB fix the white areas too....as new as your pool is. you should not be dealing with this issues at this juncture. Also, when...
-
TYou can probably Dremel out the brown and patch. It is a tedious job to do it without chipping the tiles. I would not try to do it...
-
Ttstex replied to the thread Help I think my pool is leaking!.This might be where the copper pipe was leaking previously and the plumber went with a PVC fix, then transitioned back to the original...
-
TKudos for diying this project. I did this on my steel wall in ground pool, I can imagine how much more work it is dealing with...
-
Ttstex replied to the thread Leak suspected in built in hottub.Fill spa to the very top at 6pm your time. turn off all pumps and close the top completely. See if you have any loss overnight? Many...
-
Ttstex posted the thread As an FYI if seeing small bubble in your filter pump basket window in Pumps, Filters, and Plumbing.In almost 9 yrs, anytime I saw bubbles in my filter basket window, it was due to the top not being torqued all the way tight. Well, I...
-
Ttstex replied to the thread Wiring in black & decker vsp to pro logic with automation adapter.Nice Allen - One for the Garden State !
-
Ttstex reacted to Golfer2000's post in the thread Wiring in black & decker vsp to pro logic with automation adapter with
Like.
I got it sorted. Not sure what setting I changed, but it seems to be working as intended now. Thanks to everyone for the help. -
Ttstex reacted to ajw22's post in the thread Wiring in black & decker vsp to pro logic with automation adapter with Like.
Put your multimeter in ohms mode. Observe the screen reading without the probes touching. That is your open indication. Touch the...
-
Ttstex replied to the thread Intelliflo VS pump tripping GFCI breaker.Wow, 94K gal pool...how do you sanitize your pool? Either way, I would recommend having a separate breaker for all VSP's. I would also...
-
-
Loading…
-
Loading…
-
Loading…