Today I went on my ScreenLogic app and noticed the temperatures were reporting as zero degrees and it was showing zero salt on the intellichor part of the app. When I went to my easytouch automation system (520538) temps were working so I know it isn’t a bad sensor. What I ultimately figured out is that the ScreenLogic inside the house is working but isn’t communicating with the automation system. When I looked a the card in the outdoor antenna there was a huge mud dauber glob of mud on it. The pool and automation is 12 years old but the ScreenLogic is 6 years old. Do you think I am better off purchasing the intellicenter upgrade rather than another ScreenLogic system? If so any clue which of the 4 upgraded parts I would need? I know there is an $500 rebate if done by an installer. Other options are certainly welcome as well. Any help would be greatly appreciated.
ScreenLogic Dead?
- Thread starter goldmaes
- Start date
Eric,
I'd at least try cleaning the 'mud' off the outside antenna and see if it will come back to life.. Costs nothing to try and you can't make it any worse..
Here is a link to the upgrade kits...
Thanks,
Jim R.
I'd at least try cleaning the 'mud' off the outside antenna and see if it will come back to life.. Costs nothing to try and you can't make it any worse..
Here is a link to the upgrade kits...
Thanks,
Jim R.
Oh I did and tomorrow I’ll try to clean it with alcohol so I don’t damage the board, but I got it pretty good and still nothing. If I do have to do the upgrade, I know mine isn’t a legacy upgrade but do you know the difference between the D, P and PS systems?Eric,
I'd at least try cleaning the 'mud' off the outside antenna and see if it will come back to life.. Costs nothing to try and you can't make it any worse..
Here is a link to the upgrade kits...
Thanks,
Jim R.
- Jul 21, 2013
- 65,342
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jul 21, 2013
- 65,342
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
D is independent dual bodies of water and equipment.
P is pool OR spa only.
PS is pool AND spa shared equipment.