Is it time to go with a SWG?

I use plain water softener salt. At my Home Depot it is blue bag Mortons or Diamond Crystals.

Be sure to test your pool water salinity before adding salt. And only add 2/3rds of the salt you need to start, let it circulate for a day and test. Add the balance to get to the ppm needed by your SWCG.
 
The RJ60 was delivered today and so was the salt test kit. According to the kit I have 8000ppm of salt in my pool!!! Is that possible? Do I just install the SWG and start making chlorine? I clearly don’t need to add any salt at this time.
 
Can you taste the salt?

You might want to retest. Follow the test directions very closely.
 
David,

I doubt you have 8K of salt.. I'd run the test again.

Are you stirring by hand or do you have a Smart-Stir or similar deice?

As the drops go in you will see the copper color "flash" and then return to milky. The very first time it changes color and stays that way you need to stop.. Unlike some other tests you don't keep adding drops until the color no longer changes shades.

Thanks,

Jim R.
 
David,

I doubt you have 8K of salt.. I'd run the test again.

Are you stirring by hand or do you have a Smart-Stir or similar deice?

As the drops go in you will see the copper color "flash" and then return to milky. The very first time it changes color and stays that way you need to stop.. Unlike some other tests you don't keep adding drops until the color no longer changes shades.

Thanks,

Jim R.
I’ll try again, but I think I did it right. The first drop colors the water yellow. From there it never hinted at pink until the 40th drop. Yes, I have a speed stir.
 

Enjoying this content?

Support TFP with a donation.

Give Support
We saw this once before and this was the culprit that time

K-1766 Testing Errors​

If the K-1766 sample is staying milky and not turning maroon when expected check you are using a 10ml sample and not 25ml.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.