I have always wanted to utilize the flow features of my Pentair intelliflo VSF pump.
The automation is Aqualink RS PS4. The SWCG is connected to the filter pump relay, so the SWCG won’t turn on if the pump is not running.
I finally installed a IntelliComm® II Interface Adapter with a Jandy relay splitter. I plugged the input of the splitter to PGM1 port on the IntelliComm , 1st connection to the filter pump port on the panel and 2nd connection to the filter pump relay.
Everything works fine except that my Jandy Aquapure SWCG is showing 0% production. I can’t control it at the panel or iAqualink web interface. Any help would be greatly appreciate it.
View attachment 386804 View attachment 386805
The automation is Aqualink RS PS4. The SWCG is connected to the filter pump relay, so the SWCG won’t turn on if the pump is not running.
I finally installed a IntelliComm® II Interface Adapter with a Jandy relay splitter. I plugged the input of the splitter to PGM1 port on the IntelliComm , 1st connection to the filter pump port on the panel and 2nd connection to the filter pump relay.
Everything works fine except that my Jandy Aquapure SWCG is showing 0% production. I can’t control it at the panel or iAqualink web interface. Any help would be greatly appreciate it.
View attachment 386804 View attachment 386805