SWG size

[Zamsaf]

Hello all. How do I tell the size of my SWG? It was just installed but don’t know how to tell the size.

 

[mknauss]

Model number, serial number, take a picture of whatever is on the cell and post it.

 

[Zamsaf]

See the attachment.

 

[mknauss]

There are no stickers or other markings on the SWCG cell itself?

 

[ajw22]

See the attachment.

Great! Open that manual to page 16.

CONFIGURATION MENU -> CELL TYPE

Cell Type Selection
The Cell Type Menu appears after “Display Salt/Minerals” in the Chlorinator Configuration
Menu. The options are T-CELL-15 (default), T-CELL-9, T-CELL-5 or T-CELL-3.
Make the proper selection based on the chlorinator cell that is used in your system (the
Aqua Plus includes the T-CELL-15). The available selections are listed below:
“T-CELL-3” = T-CELL-3, GLX-CELL-3-W
“T-CELL-5” = GLX-CELL-5, GLX-CELL-5-W
“T-CELL-9” = T-CELL-9, GLX-CELL-9-W
“T-CELL-15” = T-CELL-15, GLX-CELL-15-W

For the capacity of each cell see Hayward Aquarite SWG - Aquarite T-Cells

You can then look at the physical cell and verify the cell type is correctly set.

 

[Zamsaf]

Thanks. I have the T15 cell. My pool is about 12000 gallons so I think it should be just fine.