Hi guys got a handy pump installed 2014
Suddenly started to make noises, here’s the video
Excuse the fig plant
Suddenly started to make noises, here’s the video
Excuse the fig plant
Jandy making noise, video link
- Thread starter Griffin_pak
- Start date
- Jul 21, 2013
- 53,111
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Sounds like a bad motor bearing.
What model pump is it?
Post pics of the data plates on the motor and pump.
What model pump is it?
Post pics of the data plates on the motor and pump.
Jandy pro series 1.5hp
so I heara very minute beeping sort of while the pump is off, not sure if it’s in my head
so I heara very minute beeping sort of while the pump is off, not sure if it’s in my head
- Jul 21, 2013
- 53,111
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Need a model number.
Jandy Pool Pumps: Variable & Two Speed Pumps | Jandy
Looking for Jandy Pumps for Your Pool? Find Variable Speed Pool Pumps & Two Speed Pool Pumps for the Perfect Pool Experience. Buy Now w/ a Pool Pro Near You!
www.jandy.com
It's a Jandy variable speed pump.
It sounds like bad bearings. Maybe from a seal leak.
It's hard to tell, but it looks like the area is not well maintained, which can lead to excessive moisture buildup and corrosion.
You might have a seal leak or a leak that hits the motor.
Maybe replace the bearings and see if that helps.
It sounds like bad bearings. Maybe from a seal leak.
It's hard to tell, but it looks like the area is not well maintained, which can lead to excessive moisture buildup and corrosion.
You might have a seal leak or a leak that hits the motor.
Maybe replace the bearings and see if that helps.
Thank you everyone
I think I’m gonna get a qualified person to replace seal/bearing. Any idea round about the price I should be paying for a job such as this in central FL?
or would it be cheaper to get a new motor
I think I’m gonna get a qualified person to replace seal/bearing. Any idea round about the price I should be paying for a job such as this in central FL?
or would it be cheaper to get a new motor
- Jul 21, 2013
- 53,111
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Good luck finding someone to replace the bearing. That is not something that can be done in the field. So paying someone to remove the motor, take it to a shop, replace the bearings, installing the motor may be greater then installing a new motor. Get some quotes before you start down a path.
ah Understood
Will take it to close by shop
upon research it seems replaced bearings don’t last long, true?
Will take it to close by shop
upon research it seems replaced bearings don’t last long, true?
- Jul 21, 2013
- 53,111
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
All depends on the quality of the work and if they properly replace the seals so there is no water leakage into the motor.
Sorry one more question
Is there a way to see if perhaps the ventilation fan at the back is the cause of the noise?
I removed the fig plant and got closer to the motor and notices the noise from the back of the unit , thinking of popping open the vent fan
Similar threads
