Search results

Forgot to add needs to be 115v. Pool is 15x24...54 inches

So my pool pump seized [Hayward super pump SP2610X15] . I considered a variable speed but my pool guy suggest getting same pump and he will install...The new model one since that is discontinued is approx.$900 or so (Hppst2610x15xe ) Complete set up 856.25 Hayward 1.65 HP I had a friend who...

I don't know it was second hand but worked great with my previous pump..thinking I just might get replacement hayward as it might be easier..thanks

I have a small heat pump attached

I added all into my signature.. Any other options in 115v? Was hoping to be under $1,000..thanks

My regular pool pump seized looking to get a new one. Can anyone recommend a 115v variable speed pool pump. Most are 230v but I don't want to change my electrical Also my pool setup is Aquasport in ground 15x24 that is 54 inches deep. Thanks in advance..

Need to replace liner and am being told I need to use Aquasport liner on my Aquasport 52 (15x24 oval)..my neighbor just used a unibead/j channel liner in his. ..but my pool guy is telling me it has to be Aquasport liner...my issue is the lack of design in Aquasport and another 4 week...

picked up a used rome pool heat pump model 75..no manual..dont know which side is in and which is out Here is picture..thanks in advance

This is second year with pool already had 110 line by pool so Hayward 1.5 pool pump was able to be converted from 220v to 110v and plug was added..pool ran fine Then this year family started asking about heater so called electrician and he gave me price for electric to be around $1900 to run a...

Ok thanks...still wondering based on my size pool what is good BTU output?

Just used glaze n seal...or I should say that' what my pavers guy used..great product well worth it..

Had electrician out to run 220 line..probably close to 100feet almost 2k.. trying to find the right size heat pump can someone please help..Pool is an Aquasport 52 inch oval pool that is 15ft by 24 feet...Pool is inground..I am totally confused on how many BTUs to get...also possibly model...

So my question is can I tap off the 1/2 gas line or do I need to run a new line from my meter..getting conflicting answers from the pool installers

My pool is an Aquasport 52 that is 15x25....how much BTU heater should I get? Decided on Natural gas....I have a 1/2 inch Natural Gas line already to my bbq..but one of the pool experts told me that I need to get 3/4 gas line..is that true? Or are there any heaters that use 1/2 inch...thanks

Any other feedback...Anyone from Long Island? Very confused any help is appreciated

I have an Aquasport 52 inground that is 15x25..It was put in last year and am thinking about installing NG heater..I have a gas line to my bbq and would most likely tee it off then go about 25 feet to the filter system where I would set up heater. Does anyone know total cost approximates...I am...

Any SWG because of corrosion..I am putting an Aquasport totally inground..anyone have any experience with this? Thanks need some answers as I am getting pool installed in less than a week

My pool builder is recommending I do not use Hayward SWG..reason being the aluminum walls will corrode at some point....does anyone know if saltwater voids the Aquasport warranty?

My pool builder is about to install floor..we had discussed vermiculite but after excavation..PB is suggesting foam bottom with no sand...does this sound right..he says my area has high water table and the last few pools he has done have been with foam and most people really like it..he also...

Going 3ft semi inground...any advice? Can't find much info.about this pool but my builder sure loves it..says it is very durable. Does anyone have one? Also trying to decide what to surround it with..seen a few pics where pavers make it look nice..all advice welcome...thanks in advance

Ok..thinking about the Hayward sp2610x15 (pool builder suggested) or sp3010x15az...don't know what difference is though besides price..thanks for all your help

Pool builder said 1 1/2 hp...i previously had 15 ft round and used a 1hp..so thinking 1 1/2 hp is good for the size

The 26115 is less than 1 HP...need a 1 1/2 HP...thanks