(Created page with "==Jandy Aqualink RS== Jandy Aqualink RS systems provide automation for your pool, spa, and backyard. ==Pumps== ===Controlling Pentair Intelliflo Pumps=== Jandy Aqualink Insta...") |
|||
| Line 13: | Line 13: | ||
This is the main reason that we always recommend the same brand for products that need to "talk" to each other. It just makes things easier for installation and warranty issue. | This is the main reason that we always recommend the same brand for products that need to "talk" to each other. It just makes things easier for installation and warranty issue. | ||
| + | |||
| + | ==Auxilary Functions== | ||
| + | |||
| + | ===Cleaner=== | ||
| + | Dip switch #1 makes Aux 1 be labeled CLEANER if you have a pressure cleaner powered by a pump. The pressure cleaner power will be connected to a relay connected to Aux1. | ||
| + | |||
| + | ===Spillover Mode=== | ||
| + | If you have a pool and spa you can enable the Spillover function with dip switch #3 on the main panel. When switch #3 is on then Aux3 becomes the spillover control. If you have any relay connected to Aux3 you need to move it to an available Aux position. | ||
| + | |||
| + | With Spillover turned on by Aux3 the POOL/SPA return valve will move to the SPA position. Water will be suctioned by the pool and returned to the spa. | ||
Revision as of 23:42, 17 August 2019
Jandy Aqualink RS
Jandy Aqualink RS systems provide automation for your pool, spa, and backyard.
Pumps
Controlling Pentair Intelliflo Pumps
Jandy Aqualink Installation Manual[1] section 3.2.7 describes how to connect a Pentair Intelliflo pump to the Aqualink.
While the Aqualink RS can control an Intelliflo VS pump it cannot control the VF functions of a VSF pump.
At one time Jandy's F/W was made to talk with the IntelliFlo VS. Then Pentair developed a new pump that was both a VS and VF pump, the VSF. Jandy's F/W has never been updated to drive the VF portion of the VSF pump.
Speculation is several years ago the Big Three (Hayward, Jandy and Pentair) decided to share their RS-485 code, so that they could control each others equipment. Not sure why that did not continue, but as time went on, the firmware running all these systems has changed, but the Big Three no longer keep this interchangeabilty in mind when they update their firmware.[2]
This is the main reason that we always recommend the same brand for products that need to "talk" to each other. It just makes things easier for installation and warranty issue.
Auxilary Functions
Cleaner
Dip switch #1 makes Aux 1 be labeled CLEANER if you have a pressure cleaner powered by a pump. The pressure cleaner power will be connected to a relay connected to Aux1.
Spillover Mode
If you have a pool and spa you can enable the Spillover function with dip switch #3 on the main panel. When switch #3 is on then Aux3 becomes the spillover control. If you have any relay connected to Aux3 you need to move it to an available Aux position.
With Spillover turned on by Aux3 the POOL/SPA return valve will move to the SPA position. Water will be suctioned by the pool and returned to the spa.
