Hi Everyone,
I do have a pentair Intelli Touch i7+3 board. a bit of the story here. the spa side remote stopped working a while back. the pool guy cut off the cable and disconnected from the board. so these 4 buttons are SPA, JET, Pool Light, and Spa Light. I remember when I used the button on the spa side when I hit the spa I could feel a bit of jet coming out but not too strong I believe it was from the air blower. but now when I turn it on from the panel I feel nothing and I did check the Air Blower is not on. anyway but when I press the Jet button. the air blower is coming on. I'm not sure if the pool guy did any other thing on the wiring after he took out the remote.
so my question is, Is that possible for me to turn on the Spa and have the air blower come on as well?
Does that mean I have to move the wiring from the Jet and connect to the Spa AUX? or I take out the Air Blower and connect on a new AUX
I don't seem to have any option to configure on the panel besides just re-wiring for the AUXs
here are some of the pics that will give you guys an idea.
thanks in advance.
Spec
InelliTouch i7 +3
Pool/Spa Pump : Pentair Interlliflo VRBLE SPD
Jet Pump Whisperflo WFE-8
Heat Pentair MasterTemp ,Air blower Polaris pool system
UPDATED
thank you, I think I know what was going on now.
before the light for SPA and Pool were on the same AUX, and the Air Blower and Jet were separate. so the pool guy changed it without telling me. so my question now what is the correct way for me to connect the light together and AUX 2 or 3
how the wiring should be? Thanks the last picture
I do have a pentair Intelli Touch i7+3 board. a bit of the story here. the spa side remote stopped working a while back. the pool guy cut off the cable and disconnected from the board. so these 4 buttons are SPA, JET, Pool Light, and Spa Light. I remember when I used the button on the spa side when I hit the spa I could feel a bit of jet coming out but not too strong I believe it was from the air blower. but now when I turn it on from the panel I feel nothing and I did check the Air Blower is not on. anyway but when I press the Jet button. the air blower is coming on. I'm not sure if the pool guy did any other thing on the wiring after he took out the remote.
so my question is, Is that possible for me to turn on the Spa and have the air blower come on as well?
Does that mean I have to move the wiring from the Jet and connect to the Spa AUX? or I take out the Air Blower and connect on a new AUX
I don't seem to have any option to configure on the panel besides just re-wiring for the AUXs
here are some of the pics that will give you guys an idea.
thanks in advance.
Spec
InelliTouch i7 +3
Pool/Spa Pump : Pentair Interlliflo VRBLE SPD
Jet Pump Whisperflo WFE-8
Heat Pentair MasterTemp ,Air blower Polaris pool system
UPDATED
thank you, I think I know what was going on now.
before the light for SPA and Pool were on the same AUX, and the Air Blower and Jet were separate. so the pool guy changed it without telling me. so my question now what is the correct way for me to connect the light together and AUX 2 or 3
how the wiring should be? Thanks the last picture
Attachments
Last edited: