My in ground pool weir doors have 1" by 1" styrofoam floats in the corners to keep it floating. Where can I get these or what can be used?
Weir door floats
- Thread starter M.House
- Start date
- Jul 3, 2013
- 9,027
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
Welcome to TFP 
We usually use Inyo for parts as they are great at finding these types of things.. Here is a replacement that you could cut to fit... You can also call them and see if they have the exact part for yours
We usually use Inyo for parts as they are great at finding these types of things.. Here is a replacement that you could cut to fit... You can also call them and see if they have the exact part for yours
panic_button
Bronze Supporter
- Jun 23, 2019
- 354
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I used some closed cell foam that was used in packing a TV. It looked exactly like the foam I was replacing, used the water logged old piece as a template.
Similar threads
