I've been fighting metal issues in my pool for the last several years. I feel the amount of metal in the water is too high and I'm tired of trying to manage the staining. I tried replacing as much as I could last year (leaving water up to the bottom of the stairs in the shallow end) but that wasn't enough. I've since removed the corroded heater from our plumbing and I need to start over!
I have a water service that can deliver the water from an area that is not high in iron (like our area), but I'm concerned about keeping the vinyl liner secure. As I understand it, the liner would need to be vacuumed tight against the walls to prevent tearing. Is this correct?
Can I do this on my own or is best left to the local pool pros? I'm pretty handy, but I'm not sure if this requires some specialized pumps/vacs.
Thanks!
I have a water service that can deliver the water from an area that is not high in iron (like our area), but I'm concerned about keeping the vinyl liner secure. As I understand it, the liner would need to be vacuumed tight against the walls to prevent tearing. Is this correct?
Can I do this on my own or is best left to the local pool pros? I'm pretty handy, but I'm not sure if this requires some specialized pumps/vacs.
Thanks!