Varied FC Testing Methods

[Gambit80]

Use the 10 ml sample size - each drop of R-0871 equals 0.5
Use 1 rounded/generous scoop of R-0870 powder
More than accurate enough and saves on reagents

I've seen this comment a few times and have to ask why the instructions are not written that way from the start? Not trying to hijack thread, just curious.

 

[reggiehammond]

0.2 ppm resolution consumes a lot of reagent, which the test manufacturer that wrote original instructions happens to sell!

 

[proavia]

I've seen this comment a few times and have to ask why the instructions are not written that way from the start? Not trying to hijack thread, just curious.

I see you have the TF-Pro Salt.
What sample size is indicated on the included directions card?

I have the TF-100 and the directions card advises to use a 10 ml sample size for the FC test.
No idea what the Taylor K-2006 diredtions say.

 

[Gambit80]

I see you have the TF-Pro Salt.
What sample size is indicated on the included directions card?

I have the TF-100 and the directions card advises to use a 10 ml sample size for the FC test.
No idea what the Taylor K-2006 diredtions say.

Now that you ask and I just came back from testing, I realize I measure the exact same as previously indicted, just was not thinking correctly.