Upgrading a dead Aqualink Z4 to RS

[jfb1722]

My 3 year old Z4 died yesterday most likely from a cracked interface screen. Once disassembled the interface was full of water and the entire controller is not working. I was considering upgrading anyway so this just forced my hand. I currently have one Jandy 2.7 VS pump, aqua pure R0452400 salt cell with APUREM power center, air blower and 9 led lights (5 pool, one spa and 3 in bubblers). I also have a sub panel which powers everything above.

Which RS bundle is best for my application?

 

[PoolGate]

The higher the number, the more things you can control. List out what you want to control and see where that takes you. My guess is an RS8.

 

[1poolman1]

My 3 year old Z4 died yesterday most likely from a cracked interface screen. Once disassembled the interface was full of water and the entire controller is not working. I was considering upgrading anyway so this just forced my hand. I currently have one Jandy 2.7 VS pump, aqua pure R0452400 salt cell with APUREM power center, air blower and 9 led lights (5 pool, one spa and 3 in bubblers). I also have a sub panel which powers everything above.

Which RS bundle is best for my application?

View attachment 578636

Always go big. RS8.