I have two identical pentair VFD pumps. One is for pool/hot tub/bubblers and one is for shear descents. When I turn my shear descents on the pump ramps up to the set point of 1900rpm. When I turn the other pump on it goes to maximum rpm (3400) and then comes back to set point. The issue with this is if everything is off and I turn on my bubblers they shoot up about 7' before the pump comes back to 1400rpm. Now as much as the kids like this I am afraid I'm gonna greak something!!! I have looked on the pump control panel while in maintenance mode and on the panel itself and cannot find anything to adjust this...thoughts????