I’m a first time pool owner. Specs should be in my signature, but it’s a 32,000 gallon chlorine pool with a vinyl liner.
I got the pool opened and got all values up to normal levels, but was having a hard time getting FC above 4. Did an overnight loss test and it dropped from 4ppm to 2ppm overnight.
Decided to SLAM. I put in the recommended 6 bottles (121 oz.) of 6% bleach around 8pm. Tested at 9pm and the pool was only up to 4ppm. Added another 4 bottles, tested at 10pm and it is still at 4.
I cannot figure out how six gallons of bleach only raised the FC by 2 ppm and then 4 gallons did essentially nothing.
Can anyone tell me what’s going on?
I got the pool opened and got all values up to normal levels, but was having a hard time getting FC above 4. Did an overnight loss test and it dropped from 4ppm to 2ppm overnight.
Decided to SLAM. I put in the recommended 6 bottles (121 oz.) of 6% bleach around 8pm. Tested at 9pm and the pool was only up to 4ppm. Added another 4 bottles, tested at 10pm and it is still at 4.
I cannot figure out how six gallons of bleach only raised the FC by 2 ppm and then 4 gallons did essentially nothing.
Can anyone tell me what’s going on?