- May 9, 2021
- 132
- Pool Size
- 19300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
I’ve tried to read up here but I think I need some tips on how to measure calcium hardness with the Taylor. I continue to measure low even after adding Hardness Plus.
I use a speed stir and add drops very slowly but it seems like I am measuring about 100ppm low.
Any recommendations?
I use a speed stir and add drops very slowly but it seems like I am measuring about 100ppm low.
Any recommendations?