When the rolling blackouts stopped rolling, my pool had been sitting for probably about 3 hours. I thawed and opened what I could with a blow torch. I haven’t had a chance to run the system yet since the bottom half of my filter housing is still frozen (I removed the upper half, I just now found the drain). Hoping the heater didn’t suffer any damage.
Long story short, my Hayward T-3 salt cell cracked. It’s only 2 years old. Can I glue/epoxy this thing back together with a good clamp?
also, looooong time ago I cracked a union nut. What’s the best way to replace this, there’s not much PVC to work with.
Long story short, my Hayward T-3 salt cell cracked. It’s only 2 years old. Can I glue/epoxy this thing back together with a good clamp?
also, looooong time ago I cracked a union nut. What’s the best way to replace this, there’s not much PVC to work with.