Testing results

[Weightsnut]

Got my Taylor testing kit, spinner etc. and have been testing to practice a bit. Upgraded the pool math app so I can store logs etc. Best way to share log from pool math app to the forum? Here are my most recent numbers. I went with the reccomended additions on pool math.
==========================================
Pirate Cove
------------------------------------------
Build Type: Plaster
Volume: 13000 gallons
------------------------------------------
Latest Test Result Summary:
FC: 2.0 (17 hours ago)
pH: 8.2 (17 hours ago)
TA: 140 (17 hours ago)
CH: 275 (17 hours ago)
CYA: 40 (17 hours ago)
==========================================
------------------------------------------
Chemical Addition 04-27-2020 @ 01:52 PM
------------------------------------------
+ 39 FluidOunces of MuriaticAcid29

------------------------------------------
Chemical Addition 04-27-2020 @ 01:51 PM
------------------------------------------
+ 50 FluidOunces of Bleach

------------------------------------------
Test Results 04-27-2020 @ 01:38 PM
------------------------------------------
Free Chlorine: 2.0
pH: 8.2
Total Alkalinity: 140
Calcium Hardness: 275
CYA: 40

------------------------------------------
Maintenance 04-24-2020 @ 09:31 PM
------------------------------------------
Cleaned Filter

------------------------------------------
Maintenance 04-24-2020 @ 09:30 PM
------------------------------------------
Vacuumed, Brushed

 

[mknauss]

You are sharing your Poolmath logs. Click on your Member name. The link will show up.

 

[Rancho Cost-a-Lotta]

Good job on testing and great choice on the kit and Speedstir.

Things look good to me. Make sure the chemical additions did what you expected. The MA addition should work towards lowering TA and put your CSI in a good range.

It you haven't yet, read up on CSI. Try to keep it within the range of -0.30 to 0.0:

Calcium Saturation Index (CSI)

How is CSI calculated? Very simple – use our PoolMath tool. To ensure long plaster life and save money, click here to learn more.

www.troublefreepool.com

 

[Weightsnut]

You are sharing your Poolmath logs. Click on your Member name. The link will show up.

Do I have to do anything to share them from there? Or when I ask a question, whoever answers just goes to my profile to see the logs?

 

[Weightsnut]

Good job on testing and great choice on the kit and Speedstir.

Things look good to me. Make sure the chemical additions did what you expected. The MA addition should work towards lowering TA and put your CSI in a good range.

It you haven't yet, read up on CSI. Try to keep it within the range of -0.30 to 0.0:

Calcium Saturation Index (CSI)

How is CSI calculated? Very simple – use our PoolMath tool. To ensure long plaster life and save money, click here to learn more.

www.troublefreepool.com

Thanks! Just added water temp and CSI to the pool math app.

 

[mknauss]

Do I have to do anything to share them from there? Or when I ask a question, whoever answers just goes to my profile to see the logs?

Most of us go and look at the logs. You may still have some members ask about test data. It is fairly new that we can share test data.