Test Post.
- Thread starter drknapp
- Start date
- May 3, 2014
- 58,401
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome. Which Easytouch do you have, PL4 or PS4.? Do you have Screenlogic?
What test kit are you using?
What test kit are you using?
Thanks for the welcome.
My Easytouch says PL4/PSL4 in the manual and on the label. I do have a pool/spa inground. (guess I should include that in my signature.
)I do use Screenlogic.
I have purchased the TF-Pro Salt with the smart stir.
Last edited:
- May 3, 2014
- 58,401
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Open the Easytouch box, and look at the inside of the door, upper left. There is bar code with a six digit number beside it. Mine is a 521241. That is a ET4PS -- Pool/Spa.
Great choice on the test kit. Add that to your signature.
Great choice on the test kit. Add that to your signature.
- May 3, 2014
- 58,401
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
That p/n does not show up, but looks like you have the Lite version. Lite means very limited in function.
Read Pentair Automation Systems - Further Reading
Read Pentair Automation Systems - Further Reading
Thanks for the link. Looks like I have some reading to do. I just pulled out the installation ticket. We had it installed along with the Intelliflo and actuators in April 2020. On the ticket it's listed as "522355 - Easytouch Lite PSL4 Sys W/Screen Logic" It appears the J23 jumper has been cut out of mine. They didn't connect my old pool lights to the new controller. I eventually like to have LED replacements installed.
Similar threads
