Hello,
I would just like to say up front thank you for any help i receive on this topic. I have two questions to ask. I just purchased an intex 16' ultraframe pool. It came with there standard 1500 gallon pump and filter, while filling my pool I started out using a hose and my well, unfortunately the bottom of my well was stirred during this and has put some clay in my pool water. I was able to fill up about a 1/4 of the pool and had a water truck come in to fill the rest. I have been running my current pump on a 12 hour cycle for about two weeks now I check my chemical levels and add them as needed but I still have a very cloudy green/ brown water. I just purchased an Intex 2650 gallon sand filter which I hope helps filter the water a little better. Is there anything else that I can do to help and try to remove the clay particles that are in my water?
The second question is, does anyone have any experience swapping out there old pump to this style pump, will I need to have any adapters or additional items to make this is smooth process? My pool is currently filled so any tricks to help keep the water in would be greatly appreciated. I am new to the pool so I apologize if this is a common issue was unable to find any topics in the forum on it.
Again thanks for any help I receive.
I would just like to say up front thank you for any help i receive on this topic. I have two questions to ask. I just purchased an intex 16' ultraframe pool. It came with there standard 1500 gallon pump and filter, while filling my pool I started out using a hose and my well, unfortunately the bottom of my well was stirred during this and has put some clay in my pool water. I was able to fill up about a 1/4 of the pool and had a water truck come in to fill the rest. I have been running my current pump on a 12 hour cycle for about two weeks now I check my chemical levels and add them as needed but I still have a very cloudy green/ brown water. I just purchased an Intex 2650 gallon sand filter which I hope helps filter the water a little better. Is there anything else that I can do to help and try to remove the clay particles that are in my water?
The second question is, does anyone have any experience swapping out there old pump to this style pump, will I need to have any adapters or additional items to make this is smooth process? My pool is currently filled so any tricks to help keep the water in would be greatly appreciated. I am new to the pool so I apologize if this is a common issue was unable to find any topics in the forum on it.
Again thanks for any help I receive.