What does everyone set their SWG at while having active swimmers? I’m pretty dialed in now just trying to figure this out. CYA is at 30 since we live in Chicago and I have an autocover which is almost always on. Only time sun sees the pool is swimming and days after shock or random off gassing. I tried 80% before and it seemed to work well. The day was 83 with full sun and it appeared to keep up plenty with the bather load. I believe it never went below 4PPM chlorine that day. Suggestions?
SWG Percentage with swimmers
- Thread starter sodfather
- Start date
- May 11, 2021
- 973
- Pool Size
- 7000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-30
You will to give a little more details… what is you SWG rating, how long do you run your pump…
It is actually a very good time to Create Your Signature - Further Reading
It is actually a very good time to Create Your Signature - Further Reading
- May 27, 2021
- 1,342
- Pool Size
- 17000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
80% seems high for your setup. I run 24/7 similar size pool, full sun, no cover, 54 CYA, and run the ic40 at 17%. I’m still backing it down slowly because I’m still around 5 ppm fc and want to be closer to mid 4.