Opened my pool a couple weeks ago and all looks good but my SWG seems to not be producing much if any.
I replaced the cell at the beginning of last season, May 2018. My first thought is it was bad even though all lights indicate it's working.
I've been adding a gallon of LQ 10% every few days thinking it's just getting caught up from the opening. But I don't want to add much as it's increasing my salt.
I've been running super chlorinate every few days while running the pump 24 hours at a time. Normal run time is 10 hours a day.
Keeping it set at 80% normally in the past 40%-50% works perfect.
I'm re-cleaning (did it two weeks ago) the cell now in a 20% (MA 31%) soak to see if that's the issue even though it looks clean.
My numbers are;
FC 1
CC 0
PH 7.4
TA 100
CH 180
CYA 80
Salt 3900
Temp 88
Pool looks, smells, feels great, and perfectly clear. Just not getting chlorine.
Any thoughts?
I replaced the cell at the beginning of last season, May 2018. My first thought is it was bad even though all lights indicate it's working.
I've been adding a gallon of LQ 10% every few days thinking it's just getting caught up from the opening. But I don't want to add much as it's increasing my salt.
I've been running super chlorinate every few days while running the pump 24 hours at a time. Normal run time is 10 hours a day.
Keeping it set at 80% normally in the past 40%-50% works perfect.
I'm re-cleaning (did it two weeks ago) the cell now in a 20% (MA 31%) soak to see if that's the issue even though it looks clean.
My numbers are;
FC 1
CC 0
PH 7.4
TA 100
CH 180
CYA 80
Salt 3900
Temp 88
Pool looks, smells, feels great, and perfectly clear. Just not getting chlorine.
Any thoughts?