Hi guys - I am looking to convert to a SWG for my 17k gallon pool, but I have a very tight budget of $600. I will be doing all of the work myself. The pool is in Chandler AZ and uses a DE filter and a 2 speed pump, run by a pair of intermatic timers. There is a 120v outlet in the current box, and I am sure I could add another or hardwire if needed. I'm not a professional electrician by any means, but I am an avid DIY'er and fairly competent.
I am hoping that going salt might save a little money over those 100$ buckets of chlorine that don't last long here in the summer, but mainly because I need something more consistent. I am very busy with work, kids, etc, and I need something that will survive on its own better if I need to be out of town for a week. I've also never really dialed in the tabs either. So this is pretty much a convenience thing and if I save some money or have a better pool experience in the long run then all the better.
I read some other threads about running an IC20 (or would I need an IC40?) without having to install the easy touch, but not sure how that plays with their power center and getting down to low voltage. Any clarity on that would be appreciated.
Thanks in advance!
I am hoping that going salt might save a little money over those 100$ buckets of chlorine that don't last long here in the summer, but mainly because I need something more consistent. I am very busy with work, kids, etc, and I need something that will survive on its own better if I need to be out of town for a week. I've also never really dialed in the tabs either. So this is pretty much a convenience thing and if I save some money or have a better pool experience in the long run then all the better.
I read some other threads about running an IC20 (or would I need an IC40?) without having to install the easy touch, but not sure how that plays with their power center and getting down to low voltage. Any clarity on that would be appreciated.
Thanks in advance!