SWG and Taylor’s aren’t matching

[ajw22]

Couldn't hurt to add a bag or 2 of salt ( not sure what size your pool is ) and get it up to around 3500.

Yes, it can hurt a Hayward system to have higher then ideal salt.

With a Hayward system the amps are proportional to the salt level. High salt draws higher amps. Higher amps heat components and the board. The Hayward boards have many failures due to burnt components caused by high amps caused by high salt.

Hayward Aquarite SWG - Further Reading

www.troublefreepool.com

 

[ajw22]

How do you recalibrate? I cannot find instructions for my Omni logic

You don’t.

You were correct in post #5 where you said…

The Omni logic has instructions for resetting average salt

If you want to reset the salt and start the average calculation over then do that.

 

[TeenaTeens]

You don’t.

You were correct in post #5 where you said…



If you want to reset the salt and start the average calculation over then do that.

So that’s the method. Thanks so much. Will call hayward today and confirm